Search results

GFP 300 or 500 series best bang for the buck. Both top roller heat assist.

buy a GFP from a local reseller...make sure it includes training. Yes if you dipped your toe into the pond and bought a printer, you will need/want a laminator...

What are you doing that your printer wastes that much ink, cleaning after every pass? If you switch from white to 6/c and back you burn 130ml per head. A normal purge is 5ml of ink, a performance is 15ml. Is your printer set to performance? There is actually more than 3 liters in every box to...

you can print solid fields of magenta from individual heads go to print tests under service

make sure all fittings are tight, check up by the carriage assy. make sure no leaks where printheads connect to ink line.

Pull the box make sure the ink line is not pinched inside cutting off ink flow. Also, did you prime the ink box filter before installing? Ink should be flowing before you plug into the printer. You would not know that either of these are an issue until you run through all the ink in the lines.

are they laminated graphics? I think everyone addressed the printer issues...besides reduce heat. If laminated, make sure you have almost zero tension or brake being applied to the lamination film spindle...

its probably worth more pulling apart and selling off parts on eBay...

it should work...troubleshooting a hdd failure/display failure you can plug in any standard monitor and it will work. And you can access the bios on boot to enable keyboard support.

Is there a valve near the waste ink tank? I know with a HP FB series flatbed, if that valve s open it creates a stronger vacuum than the printer creates at the heads and will cause this to happen...usually with outermost heads on the carriage...so if someone recently emptied ink, they may not...

certainly rolling the dice with a Chinese printer...it had to have shipped with some form of maintenance card, no? Whose inks are you using? Maybe the ink manufacturer could shed some light as to what they can be cleaned with if they are able to be touched. One and Fugi have an semi-automatic...

I second GFP. This unit looks like a Kala..they are a bit pricey like 12-15k I believe...I never heard of it before...you should demo the unit before you buy it

are there new printheads in this printer? 26500 is a very old printer at this point. The end of life of the product has been set by HP. Hope you picked it up cheap. Where the inks new? You can remove them and agitate the ink and reinstall.(if it has been sitting awhile) What type of media are...

you need your dryer cleaned....the pm service should cover this...

gap is a super easy laminator to use...buy the larger one. You should own this thing for the next 15-20 years....I agree with Andy about Roland...this series anyway, but I can't drink the royal sovereign koolaid....not a fan myself. If you need a print cut look at a HP latex or Epson print cut...

Have you tried Onyx? No charge for a 30 day demo...Wasatch is a bear to run and I cannot stand Flexi...different strokes. Who charges for a demo anyway? Not sure how you lose 2' of material to start up? Please explain. I know you will lose an inch or so to make sure its fed into the dryer...if...

I don't game on my mac nor do I run windows(anymore) as long as the processor is fast and reliable I really don't care what one is inside. They have figured out through their mobile solutions different scenarios for each application. My MacBook pro with i7 runs super hot....I would not ind that...

the density is related to the media you are printing on...photobase paper and adhesive vinyls are similar, banner has more options for speed, hence, less then 100 density, try upping to a 18+ pass ode...might get you higher, or you can clone a backlit film and make it adhesive vinyl. crank your...

Just turn your power setting in Windows to performance and never sleep...issue goes away. HP caught all of the rip company's off guard with the 365. Typically a rip want to control the printer. HP said no way with this series. The printer now dictates to the rip. V10-12 Onyx and other rips were...

the 220 is more stable power and required to get heaters up to temp faster/more efficiently. Any heaters if too high can cause shrinkage...on every media you run through the latex you will create a media preset that links with an icc color profile....you control your settings here...set it once...