Search results

This ? https://www.onechancemedia.com/photo-mosaic-wall? I'm sure what ever they are using is proprietary and will take some work to do something similar. I can think of a few ways to do it semi-manually but to do it fully automated you'll need a decent programmer Looks like you just need...

I put in a 5ton AC unit and it does a decent job in the 2000sqft warehouse space 20ft ceilings I have. Keeps it around 75degrees when outside temps are under 90 and 81-82 degrees when it gets 100+ outside. Very little insulation. 1000sq ft Office has a separate AC unit and I can get it down...

Onyx and VW Illustrator/cutting master for graphtec cut only

This is the secret to vibrant prints and clog free printheads

Not legal what will happen if you do it anyways? probably a cease and desist letter if you get noticed. If you sell alot and get noticed might have to write a big check. Depends alot on the laws of your country. If you were in China you would get an honorary medal for the counterfeit work

If you know how to create cutlines for the Graphtec why can't you use the same process for the F1612?

Print, let it offgas for a few days then cut, will fix the edge curl

Uv has advantages over solvent, full bleed with no worry about edge curl. No outgassing etc.

Y you can haul dirt in an f150 but at certain volume a dump truck makes more sense

The ai algorithm was trained with data from a few years ago so it wouldn't know about ai generated art maybe? Or at least it wouldn't know what the current view ponts are on it. Maybe the next version will scrape this thread and use it in an answer

There are 2 big exhaust air filters that the machine blows air through, if not using the filters then you can exhaust externally. Filters make it within legal chemical exposure limits for a few hours per day I do notice a smell, about the same as running 2-3 eco sol printers in that space, you...

I have a couple of mural designs generated by dali ai, with some manual tweaking turned into very good designs and have sold a few copies each. A similar quality image would cost $500-$1000 to have an artist draw it

Add in 1lb of grass fed beef and your're up to $25

Yes you get the same exact colors on the colorado. Disposable thermal heads on hp latex vs much longer life piezoelectric on colorado

Roman pro products are also available at any home depot/lowes

have you considered using prepasted wallpaper https://my.dietzgen.com/sleek-6-5-mil-prepasted-satin-wallcovering-1?category=e8cbba87-6589-421b-8e61-87803e528d41 or use wallpaper adhesive such as roman pro 543

There are only minor differences in user interface from win10 The icons on the task bar are centered by default but you can align left like window 10. this is about the most noticeable change

I have half of my computers upgraded to win11 including my main design computer and rip computer. So far no issues. Going between win 11 and win 10 all day makes win10 feel a bit old. I upgraded about 2 months ago after holding out for the early bugs to be worked out

same, takes 5 minutes once per week. I've only done the nozzle optimization twice in close to 2 years of ownership

I change cars before the brake pads wear out. seriously never changed brake pads. Any other car problems are taken care of by original warranty :p