Search results

Mimaki holders, and Roland holders, take different diameter blades...

I really appreciate your suggesting I try! That OMAS board ribbon cable is a bit delicate to get out of the way, but the rest was straightforward.

Yes- working beautifully - seems the problem wasn't the HD, but the motherboard/mainboard.

Update: after removing the mainboard carefully - from the donor L260, and doing the same on the 'good but dead' L260, and plugging the old HD back in, she's working again! :) It was about a half hour careful job to take the donor one out. Then probably 15 mins to do the other one as I had no...

So far I've removed the spare mainboard/motherboard from the spare L260. I was surprised to see it has NO ram slots nor ram - unlike the L25500s which has a 512 meg chip. I'll swap them over tomorrow. Undoing the connector for the OMAS is a delicate couple of steps - but no problem.

Quote: "I wouldn't waste too much time on it, you may not be successful on it." That's the normal approach. "waste" is relative to what is gained or lost. I'm happy to 'spend' some time, seeing if the outcome might be positive, or what else we might learn. "Success" is relative to what is...

Good point. I've been doing other stuff today, but will undo the other one and try a swap tomorrow. I might also see if Selfimage is capable of cloning the L260 HD onto a spare HD, as well, since Clonezilla would not.

Peter - do you think that's more likely a problem than the hard drive? Thanks for the thought.

Thanks - I have a spare heater unit still in the other 260 here... and 2 of them in 25500s I'd pulled apart, if they're any use to you! I'm only looking for a L260 hard drive that works!

Thanks - I have the service manual - and also spare donor machine with mainboard - just that it also has a HD that is no good. I'm in Australia - I can't see the new heads - now past their date - selling for 250 pounds, nor even dollars - not when chinese clones are miles cheaper... although...

Thanks, Peter. Yes, I'm aware that the ISS has an EPROM with a clone of the important information from the HD on it. I had an ISS on our old L25500 die a few years ago. I put another ISS board in, and then had to go into diagnostics and tell it which was the correct data. Sadly I got it...

Most people use the software that comes with their router - for starters. Fabricating acrylic letters is a huge learning curve, not simply a press-button job. If you've never used a router before, I suggest you set your sights on simpler things, until you get some experience with your own...

I did buy some in the end - but it was still a worthwhile experiment, and worth asking... Thanks.

Has anyone successfully cloned their latex 260 hard drive to a fresh hard drive that did not come from HP ? I'm trying to get more life from ours as I still have 27 ink carts, 12 heads, and 3 head cleaning carts to use up, and the economy, with Covid, does not allow for a new machine purchase...

Mine is slow to reverse after plotting, but quick after reading rego marks.

Thank you. I am aware of many of the 'dangers' of the product - as well as its uses. I am surprised to see they call it MEK though. It is NOT MEK, and the inclusion of it in that statement leads me to wonder what other pieces of fiction the story contains? The majority of acrylic glues used to...

Thanks - I've just been offered an offcut of 20mm so I'm set.

Hi All, 8 years ago a customer wanted some 20mm thick clear acrylic, with a half-depth 1" rebate all round, and a design lasered on the bottom. We have 20mm white, black, and opal, but not clear. The job did not warrant buying a big sheet. So had a go at gluing two 10mm sheets together. And...

Use laser compatible Heat Transfer Vinyl - it's polyurethane. BUT beware the burned residue can contaminate the upper surface, and affect adhesion so after 10 washes it starts to let go. I have essentially given up on lasering it and go back to using plotted vinyl - it's so much cleaner, and...

Charge $1.50 - $2.00 per hole, and do them however you wish, but a rough hole gets disguised once the grommet is in there.