Search results

It all depends on the town you are working within. we have some town that states any graphics they can see through the window is governed by their Muni-Code Others are only monitoring graphics on the EXTERIOR mounted surface In the end, read and understand the codes, 99% of the time there are...

ACM and Aluminum require different cutting heads, so be careful when you switch the materials. yes, there will be material bend to it, even the 080 alum has bends, especially on the corners. the thinner/small the piece you cut, the more pronounced the bend curl will be. Also, you mention...

We have a Keencut SteelTrak 250 98" accuracy is good, with the following; Take the time to set it up to test and calibrate it for accurate cuts. Secure it, ideally to the wall, ours was sitting on the floor with their Free Standing Kit and any time it was bumped/moved the cuts would suffer be...

Outwater Plastics

BigfishDM has a wide range of materials that can fit this project. or contact your local supply rep for what they suggest/have available

Most all of the MM here have the capabilites for this. FireSprint

Building tables are easy and require minimal construction experience. whatever you make take extra care to make sure EVERY TABLE IS PERFECTLY FLAT https://signs101.com/threads/seeking-opinions-on-building-a-work-table.125523/...

most all paper printers have the option for custom die shape. 4Over Zoo Stouse Gill-Line

exactly, all brands have a "greyish" look to it https://signs101.com/threads/who-has-the-whitest-high-performance-reflective-vinyl.151165/#post-1413324

+1 for homeschooled, for public interaction, take them to work and encourage interaction like this way. The working world is NOT always a classroom and the sooner the better on how to interact to the environment also, look at non-school sponsored activities the kids can be involved in...

the picture is lacking on showing the hardware, best guess those tenant inserts are done with a "u" channel that is slightly smaller than the insert for a tension hold. I would look for hardware at Gyford Outwater Plastics

try your local Trophy / Awards shop.

for general "work gloves" https://www.harborfreight.com/professional-mechanics-gloves-x-large-62526.html anything that requires a delicate touch / no finger marks https://www.harborfreight.com/touchscreen-hi-vis-polyurethane-coated-work-gloves-x-large-64243.html

heat application is best stencil paint is another good option.

yes, the easiest and quickest is to get a piece of red vinyl and cover the substrate if your supplier is that far out for a red panel. another option is painting but requires knowledge and abilities in the paint to ensure the paint is smooth and uniform. NOTE; either of these options will leave...

each surface will react differently. while the 3M test kit is handy, we also take a piece of the intended material and stick to the wall. or a couple different material if we know it is a low VOC paint. wait several days and see what happens. rubbing with isopropyl alcohol does help, but runs...

If you are wanting a "long term" floor mat, you need to look into Dye-Sub.

both, all of the flatbed cutters / CNC we use have a minimum + run time

Are those graphics applied to raw wood? we have run into this before. as such we proof side by side, showing the customer requested and our suggestion for improved visibility.

are you looking for full reflective or just sectional? If sectional, produce the banner as normal and then place refective as needed