Search results

+1 for the grommets as mounting points. short term = zip ties through grommets long term = (again use zip ties to hold in place) use a toggle bolt through the grommet with a washer on the face so the bolt does pull through

This is a case of the cart being put in front of the horse. The design SHOULD have been dictated by what can be created/installed. is this compliant with the sign code for the area? safety/wind load compliant. Where & How is the power going to be running Etc. There have been several threads...

send it to The Vector Doctor

Also, agree and would like some more information

Try Orbus https://www.orbus.com/

laminating perf is all about the setup. make sure the pressure is correct - less is better make sure the lamination is webbed / feeding like glass

look at Trello

What your budget for the printer? that will be your biggest decider for the printer type There are members here who sell equipment, contact them and see what they offer in your price range. I would go with a flatbed and then apply a UV lamination over the print

Looking for this frame, or a like freestanding sign system. have already tried displays2go and outwater plastics overall height is adjustable area sign is held is adjustable. interior grade unfortunately, this is the only image provided by the end customer of the frame.

Very clean install and that font does sell the design layout. Do you have any images of the back?

Do you have a link for the webinar?

We make our table throws as a Loose/drape cover. However, we have a project that calls for a "stretch" We currently are looking for a 4 Sided option, see the image. Any suggestions, Thank you

so are you buying sight unseen or at an auction? cuts/damage to the rubber pressure wheels flats spots on rubber wheel try to adjust the wheels and see if there is any sag or one area touches more than another. wheels rotate/turn smoothly and easily powers up and runs

651 is going to be hard to install. you want a better grade, ideally one with air release / repositionable. Using a plotter vinyl is better VS printed for longevity. Use a paper transfer, start in the middle and work out using the "triangle method" for installation

EXCELLENT ADVICE!!! This thread has digressed enough. Please remember that this forum is only as positive OR negative as the contributors. We (members) can either "try" and act civil or turn it into a "he said, she said, they said" poop slinging fest Thank you for your time and PLEASE ENJOY...

We have found the invoicing of the product and labor are placed on separate invoices works good, This way as soon as production is done you can bill them, and then bill once installation is completed.

take the below as is and NOT legally binding. Threating NEVER has a good ending. Claim there are "safety concerns" with the signage and can only be repaired off-site. At this point you have the product back in hand and can hold until payment is made in FULL We have also used if payment is...

It is a hard lesson to learn, but once you do, very helpful and calming. If you feel uneasy about the project or customer, graciously remove yourself from the scenario. Can think of a couple of projects that went bad during the process, you are now out of time, effort, material and a bad rep...

You can measure out the alignment you can place registration marks for alignment Since you are 2nd surface mounting and using acrylic, how do you plan to mount this sign? Also, 2nd Surface mounts, especially on a clear substrate, are more prone to show installation errors. YouTube is a way...

we use a multi-step process spray / soak with LA's Totally Awesome All-Purpose Cleaner Scrub with https://www.dollartree.com/scrub-buddies-non-scratch-scourer-with-plastic-handles/237317 rinse/repeat until oxidation no longer comes off the surface, usually good after 2 cleanings clean with...