Search results

in the drop down add more color layers to include the white background. If you just have a 2 color logo then in the drop down have 3 colors to trace. If you only have it set to 2 then Flexi will disregard the white.

My shop runs 3 inkjets and a Gerber Edge 2. Thermal is good at what its good at. Clear decals with white or color over white. Reverse print on cling and stuff like that. I keep our Edge in service just to print a few things i cant print with inkjet. so if a Gerber Edge is what will work for you...

I would outsource if all I was printing was 10 to 15k decals a year on a machine. Printers love to be printing and hate sitting idle. But If I had to buy something I would buy a used Roland Ecosol printer. Any model would be fine but if you wanted to not spend a ton and if the heads were to go...

Thank you. You are my hero.

I know it but cant find it.

We use the Desktop subscription. We did the same, upgrade after 2 or 3 years. It sucks to be on their subscription plan but I didnt want our books to on "their" servers. And we also use print boss addon for our check printing, if we migrated to online it would have been a royal PITA to print checks.

Zero-Nine was in business long before they made printer foils. In the 70's and 80's they made BMX number plates and numbers.

We used to run glass tops and they are good, except when someone tosses a tool on it and it breaks and glass is hard on blades. I've switched everything over to either yellow tools or mcmaster carr. https://www.mcmaster.com/87875K64/ http://www.yellotools.us/Cutting/Cutting-Mats/

That head is done. It took a hit. Just be thankful it wasnt all 6.

The crap I've seen around here, it's a wonder most of the buildings haven't burned down.

Busy as a cat covering sh*t. Slowed down on our big fleet clients due to vehicle shortage but picked up on individuals. Have been printing some fine art lately that fell into our lap.

Been using them for years in our SP540i and XC540 with no problems. We run bulk systems on both.

Applied Graphics, I will call you next week. Out of the office till Tuesday.

I have an old 54in laminator. The bottom roller has a slight cut in it. It still runs good and would work for an application machine for hard substrates. I just bought a new one when the employee ran his olfa knife across it. You pick it up or arrange shipping and you can have it.

Awesome Thanks I have it in my Gerber stuff but FMF didnt pick it up.

I usually can find about anything but I'm striking out. Old shop owner died and the client cant get his files.

We are busy with customers that I usually turn away. Our big fleet customers are really hurting and in that area we are too. We are off by more than 150 vehicles this year than last year. The chip shortage is what they are blaming. Nissan isn't shipping NV vans anymore, at least thats what we...

When I do a head swap or damper change I use an irrigation syringe and draw ink into the dampers. I also use them to pull ink through a capping station.

Whats the product PM me.

So did you not go into service mode prior to pulling the old head and put in the new rank number? I have changed heads and not change the number because it was a used head and the sticker was wiped off with solvent. Not recommended but usually not the end of the world What head # did you change...