Search results

Is there any manufacturer that make yellow and orange fluorescent foils for a gerber edge II? The oem GCX--604 (orange) would be good, but I'm looking for a yellow too.

So if I continue using my lexel, I'm good? If the customer want to remove it after few years, does lexel have a ''harder'' adhesion compared to ''regular'' silicone?

What brand or type of silicone do you use for dimensional letters with stud and spacers on drywall? I use lexel + tape if they are directly on the wall. 95% of my installation are indoor. I don't do lot of it, so I would prefer something in a squeeze tube. Thank you.

We use about 6 to 10 rolls of phototex per month. But I prefer to work with GF 226. Phototex have changed something in their material lately and we use more GF 226 now. It is easier to install than phototex in my opinion. I've never tried water or paste base material, but we will try them...

I've used vandalguard when it came out. It's a real PITA to work with and we had multiple problem to erase ''dry erase mark'' even with acetone, alcohol, rapid remover and methyl hydrate. We had to redo several job. The drytac lam is thick work well if you use their wall material to roll and...

I've used and try lot of material for dry erase. If you want a print + lam, I suggest the drytac one. If you want to print on the media and be a dry erase without lamination, go with r-tape. I print with a latex printer. I don't know how it work, but even the part with ink is dry erase.

If the gen2 would have white ink, it would be great!

Do you have a picture? What printer did you use?

If you check the post by Decomurale, this printer seems a nightmare.

I've ordered 6 differents color so far. Even if the material have the same thickness, the new one seems ''stiffer''. It help alot for install without premask. As for the colors, they seems to be a bit less shinny than the previous version. Other than that, I did not notice a difference.

interesting. I wonder how hard would be the install for larger piece like 50in X 100in. Also, I don't think I will be able to print on this with my L260 Do you have a picture of both side of the print?

I have the drytac spoton. But I don't like the little spot design when you look close and it's too easy to remove like the glass adhere.

So I need suggestions for a material. Right now, I'm using GlassAdhere frost for printing that we can see both side. It's a great product, but I need something with real adhesive like regular frosted vinyl because it is too easy for people to remove the material. So I need a printable frosted...

if it's bfree mactac, I use regular medium-tack paper premask without any problem. I prefer to premask the hole thing because it as tendency to stretch without it.

I use 3M SCPS-53X transfer tape. If there is only a small part that is cut out, I premask just that part. Wet apply, squeegee down, wet the hell of the transfer tape, wait 5 to 10 minutes and the transfer tape practically fall off itself. Even for small parts like 1/4 X 1/4 it work well. If you...

Hi I'm looking for a frosted colors film supplier. Ideally in Canada. I'm looking for orange frosted film. Thanks.

Welcome! I'm located less than 30min from you. I could be able to help you if you want.

I'm in the montreal area, thanks.

Great, thank you for the information.

I would prefer a commercial grade product with a manufacturer/distributor that will give me support. I've installed frosted vinyl and tint film once that have been purchased at home depot and it suck.