Search results

http://www.ebay.com/itm/Vinyl-Express-GRC-76S-tool-holder-/281333598090?pt=LH_DefaultDomain_0&hash=item4180ca078aThis looks like it may work? John

Herman Italic? John

http://www.sailmakerssupply.com/prod_detail_list/39.This is what I used. It's been up going on three years now and looks great.

Are you printing registration marks or printing and cutting at the same time? I had a contour cut issue with my machine, I found out if I printed the registration marks it would do fine on the contour cuts but if I just printed and cut it was off. Just saying, even if you aren't laminating, it...

Timed myself and made that design in flexi in 28 seconds. Beat that!! lol

I disagree on the size thing. IMHO, you can do a lot with a 30in printer if you are not into full wraps. I do a lot of vehicle lettering and some partial side wraps and my SP300V works just fine. You can probably find one in your budget. Just check it out really well before purchasing. BTW, do...

I've been asked to do a partial side wrap on a 2006 Ford Escape. This model has the lower body cladding that is dark grey with a light texture. Will wrap vinyl adhere to this material and last. I've never wrapped a vehicle with this and want to know if I should stop at the moldings or continue...

3M 180 C is available in non-printable vinyl. I have Black and silver metallic as we speak. Fellers offers it in 10 different colors. John

Thanks for the help! john

Looking for a font close to this? Thanks, John

I agree. Save a few bucks and look for work in the Denver area. There should be something for a good employee like you claim to be. You also get to be close to your Son, which to me, is much more important then try to fix a sinking ship. Good luck! John

Check your PM. John

Looks like a slightly modified or stretched version of GT-Standard block font. You can download it free from geminisignletters.com website.

I've had great results with 3MIJ40 and cast laminate only. John

It's not cost effective since you will have to buy the other brand to get the release paper. John

Just do as Frankw stated after filling the caps with cleaning fluid. You will need to pinch the drain tubes with a paper clip or something else to stop them from draining. You can check on it every few days and drain and refill the caps if needed to keep the heads wet. John

I'm a believer in the IJ40 and cast lam. I've used a lot of this combo for trailers and vehicle lettering on flat surfaces. I love the stuff and have not had any failures yet. I'll use the cal lam for indoor projects only. John

Those are from an old aurora graphics CD package. I received that CD when I bought my fist cutter from signwarehouse back in 1999. John

I'd still go ahead and have the scotch you deserve it!!

Need help on this one. Also, notice the u looks like lower case. Thanks in advance and Happy Holidays!! John