Search results

How many pass do you use? It really look like a profile problem. Did you tried other profiles like the one included in your rip?

We use the 3M test kit if we want to be 100% sure the vinyl will stick there. But for basic jobs of just quick check, we just stick painters tape. If it stick well, the vinyl will hold. If not, we use the 3M kit and go from there.

This is a really good question that I would also like to have an answer.

I've never tried it, but here is a link: TextTape NEW tape that sticks to textiles | Banner Ups

Right now I'm using a Bosch GLL-30 laser level. I use it mostly to install frosted vinyl. The problem is we lost the beam light very easily on the glass and we cannot see it very far (less than 10ft wide in a corridor). So I'm looking for a better laser with a wider beam (a 360 degree would be...

try www.lumentruss.com They are here in Canada and the extrusion are made here also. Great product and great prices.

The problem in the startup process was the customer (government) was not clear on the design. In the bid, they stated that the image purchased would involved minor changes. So we assume that it was an image, just some cropping and put it in black & white for example. We allowed one hour do do...

So to answer some questions. Yes the design is 100% created by us (all vector). There was no image purchased to make this design. We have a contract sent with all quote saying that we own any design made by us. I can win back the job, because it's for a company own by the government. I know...

The only thing we have on our proof paper is that we own the design. Nothing more.

So we have done 2 murals for a customer (company own by the government) and we were hire by the contractor to do the job. The design of those murals were 100% custom and we had to make many modifications requested by the designer and customer. We ended up with 4 hours design time extra. We knew...

in the test print, everything is perfect (see previous post for pictures of the test). Both cyan/light cyan head have been changed last week.

I've tried it and I still have horizontal banding.

on all media, but on cheap poster paper is a bit less visible. But like I said, after changing the ink maintenance kit, there still have banding but they are thinner now. no texture. It's a gradient, but the lines would be at 45 degree if it was the gradient. If only I had another printer, I...

at 10 pass, everything is fine if I print four 12inX12in squares (CMYK). I saw some minor banding in the black, but I have to look at it on a certain angle with certain light. But the 3 other colors are perfect. The print test is very good also I've always printed at 10 pass for everything...

I've used the glassapeel frost last month as a printable frost material. I needed something that the visuel was looking good both sides. You need to print at high density to have good colors, but the look is very good even very close. I even used it to make small second surface decals (10in X...

I have to say I did not try other pass than 10. So, the printhead cleaning kit have been changed this monday (with the ink funnel, filter and bucket) . the maintenance kit is at 68% right now. As for the test print, here are the picutes. One this I just remember, I know something fell off the...

Just made a test, and nothing changed.

I've just took off the two cyan printhead to interchange them. When I've oppened the main door, I've saw small part that was looking like a small rock of ink (around 2mm X 2mm) near the carriage. I've also cleaned the printhead connector and look if there was any debrit. Now the printer is...

if it help, I've printed this at 10pass.

sure