Search results

No Post

Whoa.....you just got great advice from one of the most qualified members of this forum who was gracious enough to write that all out for you....obviously you didn't deserve it. I'd delete that last comment if I were you.

If any of you are offering a welcoming deal on a Fusion Heat Press let me know!

Avant Garde Gothic (Book) Apple Garamond BT Book (Regular)

You didn't ask any questions.....the first one you should ask is, Do I need an electrical license to do this kind of work?

I'd try Frutiger Ex Bold Oblique

That sounds typical of a defective print head. You can try cleaning the print strip on the head with 99% isopropyl alcohol but if there are lines going through your print you probably need to replace the print head, which means returning the unit to Gerber and it is about a $3000 service. They...

That is definitely derived from the Gerber font. Can I help you with that?

What's the matter with riding horses back and forth to work???

On the top line the MARINE looks like Allumi Std (ExtraBold) and the ALUMINUM looks like SignaColumn-Book (Regular)

BauerBodoni (Black Italic Bold)

For those of you printing on clear, exactly what material are you using? Is anyone printing backlit with an HP Latex? If so, exactly what material, RIP and settings are you using?

Tunneling of reflective material of that type is typical and happens often when the material has to go through tight radius turns, which is probably why it's not rated for latex printing. I'm not optimistic that you will have success with that material in the L25500. Perhaps if you could try...

Looks like Quadrat Serial

What software do you design with? For that particular number it's a pretty easy matter to do it manually if you had to. Just outline the "0" so you have a smaller copy right in the middle of a larger copy, divide it diagonally on the two corners and assign the correct colors to the individual parts.

So out of curiosity, I was poking around in Illustrator to see if it could be done there. You can use Envelope/Envelope Distort to nest objects in a shape like that but it distorts all the objects to fit. Since there is a plug-in for Illustrator that will do that properly, I figure there must be...

Exactly what type of printing are you looking for? You are getting responses for everything from business cards to Tshirts to grand format printing...

Easy, place your substrate panel on the table with one end overhanging 2', place your laminate or graphic on the substrate, apply the side that is on the table, raise the roller, move the substrate down 2' so the applied end is now overhanging the table and apply the laminate or graphic to the...

TYMOR is Giovanni

I've used canopies like that many times. Of course there is an improvement from trying to work out in the open outdoors but it depends on what you're doing as to whether or not it is worth it. Setting up and taking down the canopy is a hassle so if this is to be done often then...it's a hassle...