Search results

which Model from colorspan ? br wunder

is not so easy to solve your problem.....i think your inkcartridge is not good set......the needle is bent or closed....must be come ink to the damper if you pull with syring..... so check this first......be sure you can dismonut the inkcartridge and pull again with the syring at the damper and...

Hi Hozne15, what you talk about ?......to launch it in US is very expensive....this time we search a good Distri for US so we hope in 2014 find any with enough Skill for Colorspan & FB-Series.......:rock-n-roll: At this time we support all machines in europe and the testing periode is Over...

the colorspan Displaymaker 72-98UV and Solvent are always a very good Production machine......never find a hybrid Printer with same technical referenz.....Very Fast Printing and Production Quality......we dont speak from a Photoquality Printer.....it is a Production Horse and runs and...

alternate Latex Ink launched (25500 & 65500) by Blue-Mall Swiss.....Mix&Match & Plug and Play. best regards wunder

How many need ? for all 6 pumps/Tubes br wunder

you must change the printhead.....or you can check the PH-Voltage correct it up +1 Volt L+R and run a IQ-Testprint again best regards wunder

the best 3rd Party Inks from Lyson/Nazdar...works perfectly nothing else.....all other likes Marabu or triangle Bordeux runs but not stable.... br wunder

settings in the cutter are wrong.....mark detection a.s.o. check this first and set the startingpoint under the red led pointer begin 1st with one mark detection and check working and after that set the mark detection up to 4 marks a.s.o. br wunder

Thats fully right what you say....:rock-n-roll: no original chips offer is dubious. There's a serious Swiss company BM/OZA offering the tested inks for the HP machine. Since you also get a guaranteed for the chip too. best regards wunder

you need to install the videonet protocol "class B Network....sample Mask 255.255.0.0 IP 169.254.14.154" best regards wunder

you say..after cleaning seen all good......so i think the troublemaker can be the damper....to check it please use new damper and print again...otherwise you can check it by printing unidirectional "slower and the damper can regenerate the ink level inside".....other printing with Print & Wipe...

you called my Nick :notworthy: here I`am :ROFLMAO: you can be sure that we have the solution for incl. Profiler....we have installed/swop more than 27 Solvent units like S/SR/SRX and SI-Only................. and many more UV Machine and all Works perfect :rock-n-roll: We have many Parts in...

Hello Mspec, yes right is not Standard LAN installed only 4 wire yep !!! but Standard Lan mean 1:1 and not Crossover. A Customer has change it and 1:1 Kabel CAT 5 used since 2012 and well funktional without any Problems. best regards wunder

and 3rd Party INks available....what else :notworthy:

the fuse are under the HEAD-BOARD on Mainboard. there 8 Flatcabele and 8 Chips to loacte see little SMD Fuse !.....if version with socket and version soldered... 2 or 3 AMPERE best regards wunder

I dont now why.....the techs and many other people still revolt the Colorspan Solvent&UV series. Yes there is very tricky to allignment but 16Heads are 16 Heads :rock-n-roll: But is the machine one time Perfekt allignment. is this a great Production Machine and a very Good Working horse...

Hello Kim, we do the service by many customs in Germany they used 9000/1000 with OEM Ink and never a Problem see or Never become a service Call......Same by Customer they use 3rd Party from Lyson/Nazdar "the 1st alternate to OEM" But i have many Customers they used Marabu or Triangle Inks...

if you have inside the plastiv reservoir...you can be sure thats on or more leaking and leaking only by pump the ink or purge. there is only a seal and this is the problem ....you must all disassemble and check it or renew it directly and all fine :notworthy: best regards wunder

1st you check the vacuum true the reservoir "if displayed the right vacuum can be but dont trust them for this time" disconnect the vaccum from 1st Head Black......ink must drop......and so on 2nd cyan a.s.o...show display about vacúum pressure is going down ! all ok vacuum is not the...