Search results

[RIGHT] this should work and if not try covering the area of the mark with a matte clear then the black square over it. I know the frustration of that damn Opus

I have no idea what the black stuff is or how it gets on the rollers, but it is driving me crazy in the way that sometimes it happens and other times it does not. I tried cleaning with alcohol, but no effect. Any ideas on what causes this and how to remove it? cleaning fluid? or will that...

I have a d140 and use a Mimaki printer. One of the most frustrating issues I have had over the years is that the opus reader has trouble detecting the little squares. I have found that certain laminates really need to be worked to get a good read. By worked, I have found that rubbing the squares...

A sad day for Leave it to Beaver fans. Lumpy was Clarence Rutherford...Wally's goofy friend, played by Frank Bank http://articles.latimes.com/2013/apr/15/local/la-me-frank-bank-20130416

no I have seen this many times over the years, but never have figured out why it happens. I cleaned the heads as well and still does it. It might be a bad foil where the lower edge may be trying to curl up. but too hard to figure out.

warning...dont hit the reply to thread after you have replied to thread...it erases everything...doh anyways it is odd that it did this on and off throughout that job, but not at all when i switched to yellow refective

No the yellow is the vinyl I print on..... I think it might be the cartridge, although I am not sure how to fix it

Take a look at this photo. It is occuring just along the bottom "0"'s only. I just cleaned the head and it is still doing it. Duracoat cartridges. Any idea how to stop this?

I have had one (similar) for about 5 years...It's amazing how it cleans up those sharp holes you drill and can even be used to get the sharpness off the edges of aluminum and alupanel

me too, took me all day to try and just come in using signs101.com

I just use a piece of masking tape at the top end where we never print, and if you use a 3m, more than likely you wont get residue unless it has been on for a while

This!!! I am doing letters upper and lower case now 1/4" weeds perfectly. Only problem up here is that suppliers dont supply and it is a special order.

I know but it will attach itself to a word in a thread and you know it was not put there by the contributing member as it has nothing to do with anything remotely related. next time I see one I will take a screen shot

On different forums I will be reading a thread and then one word is underlined and if I hover the mouse over it, a 3" x 3" add box opens completely unrelated to the the thread. I have seen this on my laptop and not my work computer, yet virus scans and spyware scans see nothing out of the...

agree, i just wanted to rush it through. i knew it wouldn't cut it but had to try and see lol...so it is Flexi's fault as it should know that Summa needs 4 marks minimum

It's really a non issue but I am curious what others think the problem is. You ever get a small order? I mean small, lets say 1" x 4" decal and they only need 8. OK you take it, charge them setup and make sure it is profitable. The Mimaki printed 10 vertical up a 54" vinyl. pretty easy...

I found her!!! She has changed careers http://www.youtube.com/watch?v=H8NQZGXEcm0

wonderful cause.... Scott you should consider a new career!!!:U Rock:

how new is this considering I had the cap station changed last year

sounds like you drove by a prison!!!