Search results

First of all, it is no good idea to simply cut through (with more pressure than kiss cut), because the vinyl looses stability when cutting holes into it, what leads to mistracking. For this purpose the machine have a functionality named FlexCut, what means it perforates the contours. The sticker...

When calibrating media, you can choose to measure or set a calibration value. If choosing to set a value, you can check too what value is currently applied and note it. Then calibrate the chrome media, and after doing the cuts you can set the calibration back to the noted value. Good idea would...

The i1io 1st generation table needs an Upgrade to work with the 2nd generation i1.

Shure about upgrade paths? In Europe, we can still upgrade Flexi 6.

Older Versions of Flexi do not support OPOS XY or OPOS Barcode. As far as I remember, OPOS XY since 10 (but there are Workarounds for that), OPOS BARCODE since 11, and OPOS BARCODE with the Barcode Server integrated instead of needing to use Summa Cutter Control since the last Build of 12.

Larger Touchscreen / Easier to use Possibility to print media like mesh without liner (ink collector accessory to collect ink which drains through the media) Possibility to print borderless possibility to print double-sided banner Possibility to create a complete media profile including...

Do you print out of Flexi too? Which Version of Flexi do you have?

Check your SCAN INTERVALL Settings. But most often thats a problem of the network

Flexi 10 is not able to handle transparencies, you should try Flexi 12 for that. But forget the EPS File format, can‘t be used with transparencies.

Because you don‘t use the native ink for that printer, it could be difficult to find a matching ICC-Profile. And, for Photoprint, you should provide your version, because of the manufacturer of that software has changed his ICC-System twice since the time the FJ-52 was new. Regularly, if...

What Software do you use? Could be that the software overwrites the values set in the cutter.

Port 3 your PNC was connected to, was that Com3? The printer needs Lpt-Connection. Both interface types could have the same connectors on PC-side (25-Pin), but aren‘t compatible. And, be shure to have a parallel port which supports ECP-Mode.

Why not having a look on a Latex Print & Cut-Bundle? HP Latex 315 Print and Cut Solution | HP® Official Site With this you get a HP-branded SummaCut D140R and a complete FlexiSIGN & PRINT-Software for very low additional cost.

Grain prints can happen if the heads or the feed aren‘t correctly adjusted, regularly it works fine for doing decals. Have a look on one of the print and cut-bundles, a highly integrated print and cut solution.

Totally outdated. Is the right price.

Strange: regularly the RIP-Software should set the command to switch to OPOS BARCODE into the plotfile.

Could be if the sensor gives back irregular values. I would give calibrating (or setting the Value higher than it is) a try. Regular value is 30, try it with 60 or 80.

Be shure that the pinch rollers and media is set in a way that the sensor can reach the complete barcode. If the right side of the barcode is out of the cutting area, the sensor can not reach the complete barcode. If you have a very small border, use "extended loading" to set the cutting area...

The first generation OPOS-Sensor (the one with the red light) was established in 1995 for use with screen printing, and is really weak in recognizing marks printed with low density inks, or marks on laminated prints. This Sensor is used in the SummaSign- and SummaCUT SE-Plotters, and in the...

Often bad tracking is because of the pinch rollers are worn out. They are easy to replace.