Search results

"Long Run Consistency Mode" is for stabilizing color only. Feed rate is even monitored by the OMAS-Sensor. This mode contains additional heat up procedures which extends the time until printing to about 2 Minutes instead of one, and want to stabilize head temperature. You need to activate it...

Yes, you can rotate single pages out of the bunch only when they are splitted.

Try "Page Nesting" in the layout tab of Job Properties (see screendump). No need to crush the print job into pieces.

No. You can do that with a lot of HP-Printers, for example the ones with Postscript embedded. But you can't with the latex.

Youre welcome. In this case, if it is a summasign, they are good for vinyl plotting, but not "state-of-the-art" for contour cutting.

The age (or better said production month) of summa machines can be easily seen by checking the serial number, digit 3 to 6. The T140s, if it is a SummaSign ("T140" is no clearly name), were produced up to 2005. I would NOT recommend to use a SummaSign as a contour cutter even if it is equipped...

What settings do you want to overwrite? You can't set a print mode on the printer itself, it will ever be set by the software.

No.

Regularly after around 30 Minutes the print timed out.

Hi Dean Thank you for sending me the patch from last week, the approval tool now shows the units set in Flexi (I have tried centimeter and millimeter).

Not shure if higher ink densities are so easy to upgrade on a Latex 360. They say in the documentation that the second optimizer head is needed to achieve the higher density on faster print speeds, and the bigger curing zone too.

Ah, ok. Thank you. There is an additional point I have to mention: continuous printing. On a 300, when sending single jobs, the printer wil dry and cure after every single job. On a 500, with continuous printing activated, single jobs of the same print mode can be printed continuous, without...

Who usually run 12 Passes ;) ? An additional advantage is the wiper roller mentioned in the video (if it works like they promise), and - if you have more than one unit (latex 3xx, latex 5xx, latex 1500/3000 and so on) a new cross calibration functionality which allows to synchronize the colours...

Thats the same we know.

I have asked for a 280-replacement too some time ago. The people from HP Spain (they develop the large format printers for the worldwide market) told me that the current technology wouldn't work reliable in that width (max. up to 2.2m/87"). And the 280 wasn't as successful as needed to spend...

No. But HP does. Or better said should be if there are problems. Haven't seen much of this problems until now. I haven't seen it now in real life. The curing area is larger, and there is more optimizer (means less bleed even with more ink). Until now the condensate was blown outside the...

Do not focus on the additional optimizer printhead only. The printer has a more efficient curing system too. The curing area is bigger, and the curing unit is closed (the condensate is guided to a tank instead of blowing in the air). That is part of the promised "vivid print modes" too. For my...

How do you think that an additional LcLm-Head could help with color consistency? I have no idea. The speaker mention higher densities when talking about "vivid" print modes, e. g. from 3:20. More detailed dealer information (we are dealers) talks about up to an ink limit of 185% at 10 passes...

Have a look: https://www.youtube.com/watch?v=eiIOFOc8rLY

Hi Dean I wasn't convinced about the approval tool in the beginning, but it starts being really useful with the possibilities you describe, as with the "show full size"-Button too. Please, for the areas in the world who don't speak english, it would be useful to have a localized notification...