Search results

We have a mimaki jv3-130. It sat for a while due to surgery. When i do my test print, it looks good. I did an #test print which looks pretty good. When I try to print a cyan rectangle the print quality is horrible. I'm using 3651. The vinyl is clean. Thanks so much!

Our magenta has done this on our last 4 cartridges. We're getting really aggravated. Would love to get some answers also.

One of the cables that go into the head must have been bad. It booted up after we replaced it. Thanks

We use gloves and wipe it down with alcohol.

We got that problem fixed

Tonight our mimaki JV3-130 had a bad test print. We turned it off and changed a damper. When we went to turn it back on, the green light came on but the screen was blank. Any suggestions? Thanks in advance for any information. Kim

No, this isn't a regular print job for us. We're only having the issue on the reflective. We've recently replaced all 4 heads and the capping station. It seems to have started after that. Thanks again for all the input. We're still working through all the suggestions and figuring out how to...

Thank for all your information. I appreciate it. We're a VERY small company that works out of our garage. We didn't get even a day's worth of training when we bought our machine several years ago. Everything we know, we've learned on our own through our manual, google or signs101. We...

We're trying for brown. I've never had to change the media advance. Is that in the user manual? Thank you!

We haven't changed any profiles. Thank you!

The last couple of times we've tried to print on 5600 white reflective, the print looks "smeared". We have a mimaki jv3. Any suggestions/ideas? Thanks in advance

I knew he didn't work there anymore. Just hoping he still gets on signs101.

Thank you!

I'm not sure if this is possible, but I'm looking to find Casey that used to work at Advantage. He was always really helpful, and I have a few questions for him. Thanks in advance! Kim Cockerham - Cockerham's Signs & Graphics.

Thank you very much for your help. Now we're getting an error 07 Head (--**----). I think we're to the point of trying to find someone to service it. Thanks again!!! Kim

Using Oracal 3651. We purchased the printer, brand new, around 2007. We've had a few minor head strikes. We have one head ordered. I've attached three prints we did last night. Thanks again! Greatly appreciated!

Can anyone tell help me with my Mimaki JV3 - 130? For some reason the black has overspray. Sometimes as far as an inch. Thanks in advance! Kim

Yes. We've switched those. Thanks!

Looking for tech support for our JV3 in Indiana. Thanks!

We changed the cable and still have the same problem. Can someone give me the name of a good tech in Indiana? Thanks