Search results

I have seen this before on at least 2 ocaasions... I don't mean to question you but did you by accident cross the 2 flat cables when changing heads? If this happened the current head is bad, it will pop the head every time... Again I am not insinuating anything, just trying to help... I work on...

Agreed.....

im me with your e-mail and I will send any manual you need in PDF format

why didn't you just call and ask for a copy, prolly would have been much faster... Never the less, I am sure they will send one to you asap...

Motoh actually treats their customers very well... You must first go thru the troubleshooting process with whomever you bought the printer from... A reputable dealer will have a Mutoh Trained staff of techs who can walk you very quickly thru this and order on-site service if needed for your...

You can certainly take it apart, it will be worthless afterwords though... I have taken one apart for the same reason, not much to see really...

Based on the photo at the top of this thread you need new heads... I see no way around that... Replacing the heads and not the dampers is sort of like changing your oil and not the oil filter, actually it's exactly like that... The good advise was to replace your heads and move on, you can beat...

Just good business sense to replace the dampers when changing the heads... They are cheap and while you got the heads off it just makes sense to go ahead and put clean dampers in front of the heads to possibly avoid any further interuptions in printing... Just my opinion, I just don't like doing...

Missing and Deflected Nozzles... Clean Clean Clean or just replace the heads... Remember to replace the Dampers when you replace the Heads...

From the menu go to clean and then little charge... do this twice...

24 bucks each....

Ditto, Output Size Compensation Adjustment...

Black Lines Can I see a Nozzle Check Please? With a good pic of a Nozzle Check we can diagnose the issue and point you in the right direction... Enjoy The Day,

Thanks, Compilla.... I needed that.....

Firmware should be VJ1204AS_V102.jfl

Flexi 8.5V2 Get it from whoever you purchased the software from, they will send it to you free..............

Not Hard At All Pay attention to how you take it apart... Put it back together the same way... There are documents out there that tell you how to align the heads... Remeber to note the head ranks, you will need them at the end of the process... It is about an hour long job then maybe another...

48" on the Mutoh 1204 Build your own profile............. I will share if needed....

I 2nd what randy says... 540x720 is the lowest but you must remeber that a lower res it creates larger droplets... Not much difference in the amount of ink used....

Vj-1204 It will work fine, I have tested it...