Search results

Hello, I'm having the same problem. We're you able to find that data trailing cable?

Hey, i know this is an old thread but im wondering how the 8048 has been working for you? Im torn between using the Briteline High performance lam and the 8048G. I love the shine and the look of the 8048 and its nice and thin and reminds me of the more expensive laminates but im kinda thrown off...

We're required to overlam due to these idiots here pulling off all the die cut letters. We had one road with about 30 yellow 30"x30 diamond signs with black diecut lettering on it and within a few weeks people ripped off all the lettering

Which exact vinyl do you use for cut lettering? And do also apply the 1160 clear afterward? How does plain 5100/ij680 look on top of 3937 green? Is it still quite reflective or do the letters look kinda dim. Or basically does it look up to par? As much as white reflective with overlay would...

So you would just apply something like 3m 5100 over top? wouldnt the reflectivity be different and not be accepted? or would you apply a cuttable prismatic white over?

Hey guys, so i've made a bunch of signs already for the government here in Belize and they tend to stick to the MUTCD standards pretty closely and i'm pretty aware how the signs SHOULD be made, (white backing with color overlay using all the standard 3M stuff) however, i recently came across a...

Hey, yes, i had assumed it would be something along the lines of a power supply unit or something. Now im getting the error "Plug in #2 Power Cord" when i try to turn on the printer. I've also always done my own servicing due to living in Belize so i'm trying to pull out the second power supply...

Hey guys, so yesterday I had a power outage while printing and now whenever I start a print it gets about 1 minute into the print and then gives me this error. I've tried it many times and it seems random. Sometimes it gets 5 minutes into the print and other times it stops immediately when I...

Good idea!

I bought the service manual for the printer and it doesnt look like its very complicated to change the printhead, considering my previous job before going into printing was being a mechanic. lol but i had one question, the previous owner was running aftermarket ink and i wanna switch it to...

awesome! Looks great

Does the VS540i like mine take a dx6 or dx7 printhead? Everywhere i look, it seems like you can use either one. Do you guys have any advise?

Thanks a ton! you guys are a huge help!

Thanks for the advise! yes i wish i could get tech support here in belize but theres zero dealers in the country. ok, ill order that stuff today. So theres 4 dampers for this printer, correct?

Also notice one of the wipers is completely missing. and the wavyness on the printhead itself

I just took some pictures of the right side and it looks nasty. looks as if the guy never cleaned the printer since day 1. I'd like to order everything i need to for it. can you verify if these are the right parts and the right amount...

The previous owner says he recently changed them. Do they go bad from sitting? Any chance anything is wrong with the head. I wanna know because if it is then the previous owner said he would replace it because he gave a guarantee that it'd work good.

Hey guys, i recently bought a used VS540i from a shop that closed down near me. Now before the shop closed down, i went and looked at the print quality and everything seemed to be good and image quality was good. Now a few months later, i think they may have had the printer sitting for a while...

Do you know the model numbers for those?

Ohh i gotcha. Thanks for your help!