Search results

i have been ordering very little, with the wife hospitalized, so i had fallen away from ordering from grimco. thank you!

no, ideally it will outlive me. seriously, though, slit i side of the flute, in four places, making a rectangle, (the way the supermakets make end of aisle displays) then put a length of 2" gaffer tape on the inside, reinforcing the inside seams, and allow a 2 inch overlap, with banner tape...

we have been asked to make some "wrap arounds" for the pipe protecting gas pumps (see picture) can i get white coro with flutes running on the 4' dimension? then i can use a coro claw and slit one side of the coro and wrap around otherwise, what would you use to join 2 4' pieces together ...

power supply? much like an smc 4 or 4b, i would start by carefully reseating every connector, AFTER UNPLUGGING & waiting 30 minutes you can blow it all out with compressed air, wash the boards down with isopropyl, examine heavy pcb connections for cracks a service manual would be useful. (one...

if it is pulling vacuum you have a clog (vacuum showing on the guage if no vacuum (stays at 0) you have an air leak (loose connector, pin hole or bad oring)

my favorite tool when that happens...

https://www.amazon.com/gp/product/B0BXS2HK5Y/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 we would use 2 of these @ $13/each works fine for landscape

if you don't have a perfect touch, you may need to finish with VERY fine sand paper (up to 2000 grit) and/or a good plastic polish

my fault for not taking the time to read the thread this close to the election, i just assume everything is trump/election related next time i will read BEFORE i put my 2 cents in

i like the way you think...

Oops,

https://www.google.com/search?q=how+many+employees+does+trump+organization+have+worldwide&sca_esv=f377f8634278135a&source=hp&ei=GOYSZ8ahH9680PEPlNbuqQs&iflsig=AL9hbdgAAAAAZxL0KJBk9dkY6H7niHcwyQS7XooKXTux&ved=0ahUKEwjGje77gZmJAxVeHjQIHRSrO7UQ4dUDCA8&uact=5&oq=how+many+employees+does+trump+organiza...

We are referring to trump here? he has 24000 employees all over the world. More than comcast & optimum together. Hiscompany has been around since grandmother started it in 1909. He knows something about creating jobs.

LOTS OF STUPID PRINTS? what are you doing? stealing my client base? i thought i was specializing in stupid

but they don't have $28./lb.chicken like we soon will

come on! you know perfectly well ALL judges strut around like they are philospher kings.. this is why the magna carta was written

did ink spill on board? or on ribbon cables? inks are conductive & cause a short. clean up with alcohol wipes. check carefully the ribbon cables, if one foil bent over and shorted you can cause a short then it is time to compare readings from transistor pairs & find the one that is shorted...

There are a coupke versions of the board there will be minor differences depending onnthe age of the machine if the hoard is not exactly where ssignature said, ( orcexactly the same style of fuse)you are still on the right track there will be 40 vdc going through the fuse powering the transistors

you would think the manufacturer would protect it better...

i would guess there is a second license or an upgrade needed to drive 2 cutters at the same time