Search results

also I send the design to the production manager then select my copy's then send to rip!!

I thought the were running off but after getting the true measurements of the good and bad,the bad ones are of 1/16th of a 1/8th inch border!! And im doing step and repeat. and yes it repeats itself,on any design i send .but as a cutter there are no problem when i just do cut vinyl!!

I thought the were running off but after getting the true measurements of the good and bad,the bad ones are off 1/16th of a 1/8th inch border!! And im doing step and repeat. and yes it repeats itself,on any design i send and even if i do 1 row it is off its the same amount but as a cutter there...

what i was talking about on this was the Output size compensation test print..... and the width (Y) was dead on 12" and the length (X) was 12 and 1/16th the test should print out a y axis line and a x axis line,both should measure 12" In your pic you show it falling off on the X axis,and mine...

Anyone got any suggestion???? Ill try anything at this point!!!

The reason the collection is tied to this site is the collection belongs to the owner of this forum!!!! Nice collection FRED :thumb:

:Welcome: back Roger Bailey!!!!!!!

And when i used the cutter just as a cutter it works fine,,just the print and cuts fall off !!! on the printer i cant shift the Output size compensation,because it moves everything and all are off then.

Flame .....it does it the worst with small type like business car size.........type 2 auto on the registration..............if the sheet was off all the contours would be,this is a image with a border and a contour cut,all cut fine except the last few say in a row of 10/ 7 will cut correctly...

STILL NO CALL BACK FROM TECH........... I AM WAY PI*%ED OFF,This is costing time/ money and material.....and possibly the job it self !!!!!!!!!!!!

Bump'in it up!!!!!!!!!!!

well i still have not got the problem fixed,been on the phone 3 times with tech today,i tried the sensor adjustment and it was dead on the + hairs. i also did Output size compensation and the width (Y) was dead on 12" and the length (X) was 12 and 1/16th so i adjusted for that and no...

Still the same thing.I call my tech here in a few,man it was working great , i did some contours on a 100 count order today..then started on some stickers for myself and everything goes wacko....LOL O how i love these never ending days!!!!heheheh

Its not off from the first contour,the first few are fine ,then half way they start to fall off on the width ,ill check into what you are talking about!!! Thanks for lending a hand!!

I am using Orajet 3651 2.5 mil,,i did a Sensor Offset Check and everything is fine with that.

My contours are running off in width ,i have a square with a contour cut on 10 stickers ,it starts off with a perfect contour then about the 5th on it starts running of in the width and on the 10th one its way off by a half the contour............any ideas what this could be,i messed with the...

Sounds like either its a bad roll or your cutting to deep,i get this some time when i cut the metalized films as well as the color print to deep!!! The deeper you cut the harder it will be to get off the backing. JM2cents:thumb:

Mine never worked from the get go,i was told my printer didn't support the poll feature,did you update your firmware on the printer by any chance ?

Got ya JM thanks for clearing that up because i was wondering how that worked!!!

is it USB type or a serial type??? if its a serial type i think its for both the cutter and software,,my buddy has a old style Gerber with this type!!! If it is USB its for the software only!!!