Search results

I cannot add any more pinch rollers to the model i have. It's not an option on the base models.

I don't think I'll ever understand why this cutter cuts the way it does. Squares are difficult for it to cut...Top, bottom and right of the stickers are cut fine but the left side never cuts as deep as the other 3 sides. Even when I do the pressure test the left side of the square is always not...

Yeah I'm going to refeed it and reset the tension on it to see if I can smooth out the "waves". I just never knew these were crowned and neither did the tech, which means I have no teach to even service this at all. I do have new pressure springs if I need to put some of those in. I'll start...

All I had to do was set a static IP for my Ethernet. My internet is wireless so it didn't have any affect on that.

The laminate will sometimes get waves when it's coming off the roll, and I'm thinking some of my cutting issues are because of this. I've noticed the cuts aren't cut as deep on the outer edges. Something I didn't know....I do know that one side was higher than the other but the tech measured...

It's going to be time for a new laminator. Had a tech come in a check out the rollers on my laminator and found they are warped, but in a way I wouldn't have expected. The center is tight and the outer edges are the spots with lower pressure. Anyways...it's not worth buying a set of rollers @...

Solved!! Thanks! *Phew*

No the first adapter is: 169.254.253.xxx I'm going through a switch but I don't remember having this issue when I set everything up.

I was having internet issues and reset my network setting on my laptop now I cannot connect to my Epson S40600. The setup tool doesn't detect it either. I'm stressing now as all my equipment seems to be disconnected now.

I changed my cutting strip this morning to see if that would resolve my issue and it did not make much difference at all. I'm just beating my brains out trying to understand why I can cut a complex shape with no issues but a circle or square is the hardest thing for it to do.:( The only thing...

2 kiss cuts. I had cut a bunch of lightning bolt shapes a day before and they came out nice and clean.

I've been having much success with doing full cut out stickers on my summa with a 2-pass setup. I've cut a few thousand and have had minimal problems. I had to change my blade, and got it back to where it needed to be and it was cutting good but I go to cut these squares with rounded corners and...

Looking for someone that can help me with holographic/metallic roll labels with perforations in the labels.

Has anyone ever replaced their pressure springs in their machine? Wondering how difficult it might be or if I'll have to find a tech that can do it. Local shop that sells these doesn't service it apparently.

It shouldn't have any issues with regular material. Have you tried a Media Calibration? Print a 2cm black square on the material you want to use, with laminate if that's how it would be cut, and do a media calibration on your Summa and it will adjust the OPOS sensor which should help. I've never...

It was just printing the yellow color on some clear vinyl and cutting them to the shape to fit the OPOS sensor. PDF explaining attached.

I do a lot of full cut out stickers on my Summa and I was recommended to try Clean Cut blades. And with them being much cheaper than the summa blades I figured, why not try. Well I thought it was just my inexperience with the cutting but every time I've tried them they dull out very quickly...

The yellow filter over the OPOS sensor worked well on chrome material and saved me a bundle of time taping over the registration marks.

Thanks Phil. Actually spoke with someone from Summa and they told me about the filter thing, thanks for the documentation! On my reflective stuff I just put some tape over the marks and cut out the black area and it's worked great, but not on this red glitter material. I shall try the filter...

I can't find any info that gives me instructions on how manual XY works. The manual just tells you what they do but not any more detail. I wish I had gotten training on this thing...I've had to reprint and cut this entire job on my SP-540V and cut it on that machine. Everytime I tried the XY...