Search results

wouldn't be a bad idea to check the final stage of driver transistors (resistance readings would be fine, if there was a problem, that would be drastically different resistance readings the more i read your original post, it suggests a cold solder joint somewhere. do you know anyone with one of...

ALWAYS better to compare dc voltages (and waveforms if possible)

we have had decent luck with inkjetperformance in georgia. you can also go to ebay and search roland system board and find the power sellers. go to "contact seller" and ask a question before you do this,, do some voltage checks on the transistor pairs my sc545-ex has 41 vdc power at the fuse...

we just acquired a VM1617h which originally came with flexisign mutoh edition we did not get the software with the machine 2 questions: is there a procedure to request media replacement (keyed to our serial number [a process we use all the time with roland, they are very helpful]) one of...

we attempted to register for "MUTOH CLUB' to be able to download softwares (status monitor, etc since both of our mutoh machines are used, i filled in NONE for dealer we purchased from and at the end the registration rejected our serial #, since it was used previously i imagine if a dealer...

i don't know onyx well enough to have an opinion on that, but, you should probably also check your power management settings. in device manager, both rj45 (ethernet), wireless & usb have a STUPID POWER MANAGEMENT setting that loves to cancel active print jobs disable your regular power...

one additional thought. i have fixed rolands for years & never seen this error. cornholio certainly has more experience than me, (fixing wide format has never been a full time occupation for me) it seems like an odd "mode" to get stuck in. there is one thing i would try, before going down the...

you can try inkjetperformsnce.com in georgia he may hae a board, or he can offer an attempt at circuit board repair.

I never have Doing so wouldn't hurt Anthony

ALL VALID POINTS, but, i would think humidity is the sameas it was with the old head. how senisitve is the leveling/print head heght.? should he be measuring like he is performing a tramming adjustment, on a cnc?

ALWAYS power down machine, unplug power cable WAIT 15 minutes for all capacitors to drain down it's too easy to do irrepairable damage when reconnecting those ribbon cables also inspect the conductors at the ends of those ribbon cables before reconnecting. we are always in a hurry to see the...

you know, i can do a roland with a blindfold on thank you!

we replaced printhead, and other parts over weekend. cartridges were all expired, so changed the whole set (bags and smart cards) flushed lines & one of the guys chose replace inks in menu we come up "READY TO PRINT" but if you choose nozzle check or send a print job we get a beep and...

we have the same issue with sherwin williams.

"smart business" you say? that's one way of looking at it. i suppose picking someone's pocket in a crowd would also be good businesss there is a reason grimco gets 1 order for every 25 i place with harbor or diversified or tyrelltech

putting everything back together with new head, cap top dampers, etc we flushed all the lines with solvent to get flush out we chose replace inks now when you try a nozzle check the error "replace to ink" comes up is there a way to cancel ink replacement mode?

i lost almost 50 lbs about 7 years ago, i stopped drinking soda & sugary drinks . it only took about 3 months (I HATE WATER, THOUGH. BUT I DO DRINK IT ALL THE TIME) i gained back about 7 or 8 pounds recently, and can already feel the difference

it annoys the hell out of me either things have a price of they don't years ago, we were still building & selling computers. we purchased from a large intel distributor i would call in and vincent would ask me: "what price did i give you last time for that?" i would either hang up & call...

the process is remarkably like bleeding brakes. find the right adapter, hook up either to the drain line (going into waste tank) or, more realistically, to the hose coming off of each captop pull SLOWLY (not wasting ink or damaging the internals of the printhead) much like bleeding brakes, you...

i find it hard to believe ANYONE is higher than grimco i certainly am glad to have them, when things are out of stock elsewhere, but, i hate a company who overcharges, unless you reach out to a rep & beg with a tin cup for the discount you deserved in the first place.