Search results

the older rolands are never happier than when they run 16 hrs/ day

Wow. the older machines are abandoned

the grease and lubricants thicken, (think of starting your car, on a 0 degree day) the electronics are happier at absurdly cold temperatures. before i was a computer consultant, i was in the commercial video business. video tape wrapped around rotating, helical scan video heads HATE the cold...

Victor the MP31 ink actually has a warning, that if it is stored in a lower temp room, allow ink to warm for 3 hours before printing.

the only problem with 50's at night is, you end up with POTENTIALLY a 22 degree swing in ink temp during the day. i am not a chemist, and have never done a viscosity test on my inks, but i am sure i make some of my own problems with the temperature range. i am concerned how my MP31 inks are...

use a lighted magnifying visor to be sure there is no hairline crack in the manifold (at least I NEED ONE to be sure) measure and order some o rings. solventinkjet often suggests cutting 1/8" off the lines when replacing the orings that sure is what it looks like! (and sounds like, from your...

you can't make the port ANYTHING you want? (you can tell we run flexi!) i am pretty sure you can do legacy "capture" commands. we have a couple omega computers. i will have to try

no reason you can't do either, as long as it is good, clean DRY air look in the installation manual and bebsure you give it thevpressure it requires

it really seems that building a few proper profiles would solve this a downloaded profile can't possibly compensate for the quirks of your printer

Attila, wouldn't it be easier to just go to ebay and get a netgear or old dlink parallel port print server and be done with it? serial we make our own problems , the usb end is a plug & play device / the serial end is as dumb as a box of rocks, you still need to know how to make the settings and...

new white damper? the tiny filters do like to clog

CORNHOLIO i have not had a chance to verify, this machine HAS recirculating pumps? i was wondering if they were built up with sediment (settled out pigment) and either not recirculating and all or very poorly also possible lines are clogged & at best giving poor flow? possibly time for a...

we have been using jetbest from premier for about 1-1/2 years. i wish we had switched sooner

do you "shake" your other colors. at least once a week?

the white for my mutoh is twice the price of the other inks, but, still, printing enough to keep the lines from clogging is a strategy i would consider. FOR SURE, developing the routine of pulling the white cartridge & inverting it 3-4 times SLOWLY (not enough to make it foam) would be to your...

i am not sure about your machine the current generation of machines that print white have a recirculation system, to compensate for the settling i have been warned that i would regret converting one of my older machines, to print white.

IN ANOTHER WEEK we will have our mutoh hybrid up, (printhead is coming in today) we aquired it about a month ago it uses MP31 inks. we can't wait to see how it's capabilities measure up perhaps we can print a few samples for you, so you can see if you would want to acquire a mutoh hybrid

no, i am aware, just a thought, we have 3 gerber edges, but, use them a lot less, i wasn't sure if that effect might work for you .

could you not get a similar effect with a roland bn-20 or one of the used vs300 family with white/reflective capability?

thank you, both