Search results

Installers/PDAA | SGIA

We print many custom cards. Let me know if you need any assistance.

am i the only one that thinks 13oz banner in a retractable is the worst idea? nothing worse than a black background roll up on 13oz with the sides rolling in. we only use a 15oz smooth matte anticurl blockout banner.

we all run windows and were all connected to the internet. we all have antivirus that zaps these stupid emails. be sure to have a good antivirus and dont open any unexpected attachments.

Your best approach is to get samples of oracal 751 and 651 and 3M 1080 and 3M 7125 and sit down with the buyer which might not be the installer. Sometimes the installer will tell the buyer that your 751 is not as good as the 651 because it is thinner and harder to lay down. installers want to...

the only time we get acrylic to bow is very thin sheets and when we do them we run only one of the 2 lamps.

facemounting will take more time and cost than your reprinting. If small pieces are shifting you need to mask off the open areas of the belt so there is more suction. We use chip board around the acrylic and close off the areas we dont have acrylics on. Time is money so you need to figure out...

he said 2 months and he wet installs. he only needs the end client to remove it and leave no residue. static cling is the best fit.

download cutting master 3. much better.

ebay, amazon, displays2go.com they are called standoffs. google standoffs.

I ordered the teflon strips and they failed after a month of use. the teflon separated from the adhesive it comes with. I called graphtec about it and they tried to tell me i did not clean the base well before installing. I told him the glue is fine. it is still on the rail the problem is...

use static clings.

We use MS Paint and we try to stick with fonts people know like arial, times roman, and comic sans.

avery 1360 is not optically clear. AV1360Z is optically clear. also, you should not do a wet install. you will trap water in the holes. we use oracal 290GF

be sure your local zoning allows you to run a commercial business from your home.

We've done plenty of box trucks with IJ35 and GF231 overlam. 5 years later i am surprised they still look great. we always quote 3Mij180/8518 combo but these are wine distributor delivery box trucks that will be auctioned off in 5yrs. mileage will be through the roof. PS: didnt we already...

haha. at my dads store he used to kick them straight out. he wouldnt care if they were going to spend hundreds. he would kick them out faster than Martin - Get to steppin! He said they will stink up the place and ruin it for the real customers. no lie he would tell them get out and dont...

yeah we wipe everything.

if printed use a hi tack like mentioned or oracal 3105HT and then use a 5mil poly carbonate lamination to make it durable.

use this and thank me later - Plastic Prep 6428SP we had the same problems with static. we wipe down everything using this stuff. its great. no static. no fingerprints. use a lint free wipe like wypall L30 DRC.