Search results

Woke up as in the next morning you found the printer beeping? Power off, unplug and let it sit for 10-15 minutes for everything to discharge. Plug back and power on. See if any change on test print. I have seen similar issues to this and was long ribbon cables, short ribbon cables or...

Also worth mentioning, CS Sign Supply has been a Signs101 Merchant Member for a long time. We have helped many here and continue to help where we can.

We can offer you 2nd day Fedex shipment and we stock the ink and most consumable parts. We also gladly bill your credit card the same day as shipped :) Our e-commerce site is being re-developed while you can order by phone, email or by purchasing online once our site has been completed.

material and heat issue IMO. Ran into this (similar) on an SP-300v recently. Customer had 5 rolls of banner material (remnants), all gloss and looked to be 13 ounce. All 5 printed different using same settings and only one printed without issue. I noticed the same type of pattern as yours...

Chances are that same cleaning cartridge was used during the ink up process and therefore was not full when inserted into bay 8. The recirculation line also take a good bit of the fluid out of the cartridge. I would not expect the cleaning cartridge to run dry for quite a while.

Use the CE1000 listed. Should work

Are you referring to the Driver or maybe CuttingMaster 2? The driver looks to be available from the manufacturer site: http://graphtecamerica.com/imaging_software/CP-Drivers/FC4100/64bit/OPS628-E-X64V931.zip CuttingMaster 2 does not support the CE2000

The XR can be run in 7 color option, CMYKLcLm+Lk, that requires a cleaning cartridge to be installed in bay #8

What model of Roland do you have? XR?

I used to buy a long section of the white wire closet shelf and have it cut to the width of the cutter stand. Then I would either wire tie or tap holes and drill one section vertically on the stand legs and the second section would be tied to the bottom of the vertical section at a 45 degree...

Take into consideration the workflow that will be used.... Design from what software, print through what software and to what machine, then cut from what software to what machine. I have seen a lot of "fine print" in the sales sheets of off-brand cutters touting the laser registration...

Loose head ribbon cables or failing head. If you mess with the ribbon cables, be sure to power off and unplug power first. I first thought static but the lines are too consistent. If you can get into Service Mode, run the INK FILL PATTERN. This will print solid bands of each color and will...

Good project. Looks nice. (and more sturdy than oem part from Graphtec) shhhh.....

Glad it worked and I will take one of those beers you have sitting in your rental house while on 'vacation' :)

The initial setup of a Roland SP or VS takes about 2/3's of the cleaning cartridges when inked up for the first time. Give or Take...

Make sure the blade holder is seated properly. If the plastic hook is under the lip of the blade holder, it will stop the blade from contacting the vinyl See image

Glad to help.

You can order the OEM Cleaning Fluid in 100ml and 500ml bottles from either your dealer or Roland direct. http://www.rolanddgastore.com/search.aspx?keyword=cleaning (Make sure you buy the correct fluid... If using EcoSol Max or Max2 ink, you need the SL fluid) Recommend staying with...

Blade not in the correct position in the holder, no blade (fallen out)? Power the machine down and uplug it. Then manually move the cut head assembly to the far left and Engage the sheet cut mechanism. Them move slowly to the right and see if the blade stays down. Could be something...

This might help