Search results

Get the latest Camm1 driver from GS-24 page from Roland.

Have you had, and selected your printer at the left side of DG connect screen? Might need to download and install the driver first, then DG connect will be able to validate your printer and gives you the option to download VW6. Versaworks 6 Download link is actually gives you DG Connect.

Over Current Moving Coil.

The best option for Graphtec cutters are, Adobe Illustrator with CuttingMaster4 (NOT CM5) or Graphtec Pro Studio. These made by SAi. All the other free options from Graphtec are the "I can make it Cheaper Myself" category.

Update driver. Find the latest Camm1 driver at GS page.

I still Run CasMATE 6.52 on Win10 32 Bit. I have clients resist to learn FlexiSign.

Signlab has the manufactures Palette for Summa foils. Do not need any other softwares.

Have you Installed it as Cutting Device?

You might need to upgrade to GoSign.

Should be able to run it directly from Signlab.

Cheddar Gothic Rough Italic. Lowercase

Have you set your FX to Use DHCP? When use DHCP better reserve one IP for your printer in your DHCP server. When use static IP, make sure it you limit your DHCP pool to leave some addresses to be able to use for manual addresses. For example. Router IP 192.168.1.1 change DHCP range...

Advance after plot sets the next start point after the job, without that the start point would be the same as before the job. You can set panel margin, weeding margin or copy spacing to zero in Flexi. Cut off distance setting is in the cutter.

I do not have Flexi 7 installed to check, but sure, since version 8 these Chinese cutters can be used with Flexi. King Rabbit driver is the one I have used.

What Version of flexi Do you have? Can try Creation, and King Rabbit models. or use Generic HPGL2 from Hewlett-Packard. the cutter USB port is a Virtual Serial Port. After driver installed find the Com port number in Device manager, and use it in Flexi.

Either 2 passes selected, or more likely you have 2 lines on your artwork

Best if you copy all the font files to a folder, on your hard drive. Browse for that folder from the Install Font page and select What time of fonts you are looking for. Press search. choose the fonts you need. Install or install all.

Set up network address for your Ethernet-USB adapter. same first 3 segments as the printer.

Graphtec has an option to change the Cut resolution Called Step Size. It needs to be the same on the cutter and on flexi. I Use and Support all softwares, but for Production always coming back for Flexi. For Graphtec Illustrator with CuttingMaster4 (NOT 5) is the best software combination. CM4...

Cannot see why cannot create a single file. VM Cut can do already. just choose CutContout for the cutline. Do not create registration marks in VinylMaster. and export a PDF. AffinityDesigner can do all the job as well include Cutline.