Search results

When print and Cut as well from VersaWorks, 1 PDF file enough. Vinylmaster just as good as any other software to do that.

Use shorter or thicker cable

I do double sided print to clean Vinyl on Gerber Edge. Depending on Colours how is it possible or not. Toke me some time to figure out the layers and mirrored images for a basic PUSH and Pull sign.

That could be memory overflow. Most Roland cutters does not have all handshaking pins connected. still try set the same flow control setting on the cutter and your software. If your software supports full control over the serial port. Try disable RTS and CTS leave DTR only for flow control

Alana Pro

Nice gift. It could worth a couple of thousands, or more, depending of the version of Omega. Can gift it to someone as well.

Yes, any Cutter can be connected to Win11. Use USB-Serial adapter and DB9-DB25 null modem cable. CuttingMaster2 runs as well but only supports Corel up to X7. Many other softwares can be used with CE2000.

The description does not clearly says it is a NULL MODEM cable (cross linked) but still could be. In default serial adapters are STRAIGHT. You might need a male-female Null modem dongle. Free to give a try. make sure baud rate settings are the same on the cutter and on your cutting software.

Netsol gave you a link of a SERIAL cable. IT could could work. In your post it is a similar looking PARALLEL cable. changing gender will not make it SERIAL. GX-24 does not have parallel port.

What Cable? It needs to be a NULL MODEM (Cross link) SERIAL cable or adapter. USB-Serial adapters mostly Straight. null modem cable or adapter needs to be attached. None of those items you have ordered can be used.

This one will not work. DB25 in the cutter is Serial, not parallel. This one more likely...

There is a common Summa fault. the solenoid stuck in up position and not coming down in time.

Just forget Cutting Master 5. CM4 made by SAi (Flexisign). CM5 is a huge step back by Someone else. They Should not confuse users with naming softwares.

The plugin works just fine. Locked or unlocked does not make any difference to see or not to see in the export. It is not child safety. Still did not share your Objects decker or anything what helps to resolve your issue. Cannot tell what did you do wrong. but it has nothing to do with the...

It is locked because you Should not Edit.

Visible, Locked, and Disable Print and Export are different things. It Should be locked. Show us the Objects docker, all expanded.

Change USB Class on one of your Cutter to USB 2 or any different than the other. than you can select it in Summa Cutter Control.

Unfortunately Summa software support for Mac is not a good one. There is a GoSign AI Plugin for Mac, adds registration mark and sends the job for GoSign. But the cutter and GoSign runs on PC Best Option for Mac users with Illustrator is Graphtec Cutting Master 4 (NOT 5) and a Graphtec Cutter.

Samantha Bold Italic

No issues since Flexi10.5. on Win10 or Win11 computers.