Search results

What bit do you normally use?

I got one laying around, somewhere :)

Like rick was saying. The best accuracy I've been able to get was doing a section of four at a time and profiling a small section of your spoilboard, like .015 or so the replacing your plaques on those sections. Good Luck!

I know quite a few people who use the router. You just have to resurface your spoilboard before and make sure your z is accurate. In the future as I get into more ADA i'll probably get a small engraver for the tactile and braille. But for now, I'm good!

I'm doing it on my 4x8 shopbot. Profiling my substrates & tactile then drilling the rasterbraille. 3 bit changes

cj your one step ahead of me, I have a 60, bought it brand new and it's been sitting ever since. One day I tell myself, one day

Everyone who bought a table always wished they would have bought a bigger one like a 5'x10'. I'm in that same pool with my PRTAlpha 4x8. My friend sold his PRT and bought a 5'x10' PRTAlpha

K, wait I'm confused with to much inhalement of MDF sawdust today in a jr high classroom. Is the original 1st post v-carve engraved or beveled? I got some awsome bits if you want v-carving

That is so small, sign to bit comparison. It's wood So I wanna say they use a simple 90 deg v-carving bit for beveling, then did a area clearance after. How small is this sign? Is the lettering wood too? Or is that tactile?

out of curiosity does this machine use a router or spindle? Those RPM's seem to be way to high for a 1/4" spiral bit

I'm still on 7, wish I could help.

I would make sure they have good customer service, support and happy customers. I would visit their forum boards to find all this out. I use a shopbot. I would suggest you go to their forumboard and do some research. http://shopbottools.com Make sure you have the power requirements at your...

He speaks the truth, if you have the room get a bigger table. Everyone always wishes they did

I like single flute upspiral bits Here's my speeds 1/8" CED 18-20,000RPM's .40" IPS Plunge Speed .20-.40" IPS 1/4" CED 12,000 RPM's @ 1" IPS i swill use WD-40 and shoot the bit every 30 secs or so. Do all these in one pass. .080 is butter. I like Belin Bits or Onsrud Super O are nice bits...

I have both (2)peecee and a (2)Mac. Any graphic work I do is solely on a mac. But unfortunely I have to use a peecee to run my router table and play the cool games online. I run LXI on my mac but that's basically Flexi. Also I do a different aspect of signs too. But I know if I had to do...

IF your the Eric I'm thinking of, Is it possible a "Steve" sent you that drawing to take up your whole day or week Sometimes I think I just kill myself

One more important thing on Gatorfoam. When you cut it with a single flute spiral O bit, the direction in which you cut go is counter clockwise (conventional? That the name, I forget) you will get a better edge than going clockwise. Brainfart right now on the name

I thought about adding one to my CNC Router, But I have so many people with water jets around here in my area I can get stuff cut for $100-$125 per hour as I supply the materials. I found it best for my situation to sub out anything thicker than 1/2" on metals and anything like rock rather than...

I like your small 90' service truck

Getting a Mac+ with 1meg of ram at age 12