Search results

Gerber Edge is My favourite Printer for 20+ years, you should use it. It prints CMYK, but Best for spot colors.

Amboy Black. If you have found it already, you told it to the wrong post.

ForteMTStd or UVN Dzung Dakao is the free copy of it.

Should be as good as new. It works with any cutting software, but may not with the Roland ones. I still would prefer this one than any new USCutter thing.

Kwalett Bold or Bold Narrow. Close, but not the same

Last time I looked, it was available to download from Gerber website. https://www.gerberscientific.net/gsp/eservice/SoftwareDownloads/SoftwareLibrary.aspx?stid=1&sfid=12

DJB Carly Sue Got Married

I cannot remember clearly, it was long time ago, but I did something like that in InDesign.

I used to do Cut contour with my PNC-1100 or any cutter without OPOS. Find a way to fill your material straight, make sure X-Y size properly calibrated on the printer and the cutter as well. Find the '0' point with the blade, be aware of the blade offset

This is what the SM says about it.

In PM cutter setup. 'How is your xxx connected to your computer' scroll down to select File, and browse for the folder. Yo may need to add an other cutter with a different output setup if you wish to cut directly from Flexi later.

I think you should not need to hold the file in PM. Set the plotter output as file and point it to the TSERIESS2160 folder. Your barcode server is not PM, Summacuttercontrol is.

Are you saving the Vector layer to AI or the Image? If not saving the Vector, You need to vectorise as silhouette in Illustrator to create the path for the cutter. It has nothing to do what cutter do you have.

Common Roland fault if the ribbon cable for the head breaks, or shortcuts to the body of the cutter, can cause this fault. ... and many other things.

Detectives Inc. Download Link

Yes, It works fine as well and not as strict with the EDGE2 ports and cables. Omega gives a little more support for GERBER EDGE and updated profiles.

Do not not delete the print from the artwork, if it is bigger than the Cut, the position of the reg marks would not change. I normally add a small bleed for the image. But as I said it never happened.

It newer happened with me. I would remove the knife until it reaches the point when is stopped. or turn cut off on the images already cut than send again.

Yes, That is the main advantage. It does not add the target to the width can use the same size 299.72mm with Graphtec Type 2 registration marks. Faster and quieter.

I use Envision. Graphtec SE5000-40 and Summa S class 1400 as well for contour cutting EDGE printed images. The last 2 are easier to find the registration mark, but need to take a good care of filling the material to the cutter. I Cut 10m+ on the summa without any problem already. They are...