Search results

Can you create profile with your rip software?

I would not go higher than Win7 32bit. Even if the key works on Win10, Production manager crashes with the parallel port driver. Win7 64bit you can, cut but won't be able to RIP and Print. for Windows10 64bit. start with Flexi10.5

No, It is not. You won't be able to run a Logistic company with a Ferrari.

You won't find anything better than Flexi for vectors.

Did you install Signlab to C:\Program files, or to C:\ CADlink folder? What version of signLab and OS it is? It seems you have no write permission. Try to run Signlab as Admin. Does it make any difference?

That connector hardly fails. Check soldering quality especially for the bigger parts or parts around heat sink. While you pressing the connector you possible bending the motherboard too. Once I had to replace the white ribbon cable for this machine.

GS15 :). Can I fix it for you. The main time you can use my envision.

What is your wireless IP address? It cannot be the same range as the wired.

I have printed to transparent adhesive, and cold laminated to metallic film. Or laminated first? can't remember.

I used to run it with FlexiSign.

:(

I found Plexi's Default Input profiles are useless. Replace "default" RGB to sRGB or Adobe, And CMYK of your choice. The output profile can be the same as Versaworks. I could be wrong But VersaWorks is actually Flexi production manager (photo print), or at least used to be.

Spectra32.exe comes with omega. I have done it for myself. It needed a lots of foil.

For Edge1 you could use some 3rd party USB to Printer cable, but for Edge2 only one option. It is limited by Omega Software. This is how Spandex could sell 2$ cable for 150$ . The EnVision plotter works with most of the USB 2 serial cables. After Omega 4.0 they dedicated an other USB to Printer...

Gerber Omega 2.5 does not send Edge2 jobs to network or virtual printer port. It only works with native PCI or ISA bus ECP printer port. Or one type only USB print adapter.

Omega2.5 with Edge2 never going to work on Linux. You can use it on Windows10 as long as it is 32bit For Edge2 printing, only one kind of USB adapter supported(impossible to find) The cable Spandex currently selling for Edge2 is not the one. Better make sure you have ECP printer adapter...

The New USB cable for Edge2 is actually £100 or more and it does not work with older than 4.0. The old cable is gone or hard to find. The ECP printer port works just fine on my i7 HP EliteBook 8560P Laptop with docking station. For the desktop I will find some old printer card somewhere with the...

Yes, Thank you. And I could manage to make it run on Windows10 32bit PC. It was not easy. All I need now is a native PCI bus parallel card for the Edge2. The new ones not supported. They are running under Multifunction Peripheral Controller.

Yes, I do. And found my disk as well in my old unused PC drive.

Could anyone share install files for 1.56 omega. I have lost my CD, and its not available on Gerber site anymore. – Never mind, I have found it. Can I delete this post?