• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1.

    Need 1st Font ID Please

    I just ran it through mine and it comes up as Carlton as well.

  3. Font ID Software?

    www.whatthefont.com It's a good resource for this.
  4.

    I know these threads are a PITA, but...

    From your pic it looks like a hand drawn font. You might be able to find a close match.

  5. Welcome from OZ

    Welcome from PA!

  6. Servers for Dummies

    I agree with tech. You don't need a server all you need is a good machine with adequate storage of 2 good hard drives for your files. Put it on the network and only use it for storage. Much simpler and allot less expensive.

  7. New to Signs101

    Welcome from PA!

  8. New to signs101

    Welcome from PA!

  9. Introduction

    Welcome from PA again!

  10. Stika SX-15

    have you tried to import the eps file into Dr. Stika?

  11. Im new

    Welcome from PA!
  12.

    Program Crash

    Alright, I'm with Techman on this one. I was a PC tech for 10 years and this sounds like a file structure issue. The fact that "NT" is in the error is more due to the file system being NT based. Mike, the files you are having issues with, our they on a separate partition? or different hard...

  13. Autos Templates

    Most templates are 1/20th scale. So in order to cut it correctly you would have to cut it at 2000%. But don't always trust templates, measure as well to save your but.

  14. RC Car Vectors?

    The cars are more important. The customer has the logos with a letter from the manufactures to use them. I would like to incorporate a RC car into the layout if at all possible.

  15. RC Car Vectors?

    Anyone know where to get rc car vector or high quality images for print or cut? I have looked in google and so on but didn't find much good.

  16. Need...help!

    Damn, forgot about that one Rex...... Nice call!

  17. Need...help!

    http://www1.istockphoto.com/file_thumbview_approve/2810984/2/istockphoto_2810984_middle_finger.jpg

  18. Print and cut

    Yes there is, it is called print it and then the exacto knife for the cut out! OK, I'm sure there are other ways but that would be your quickest.

  19. Cutting Master 2 & Corel Draw X3

    It was only posted to help those that it could.

  20. Cutting Master 2 & Corel Draw X3

    Here might be an issue you all are having. If you are using flexi you have to add a separate setup in the production manager. You have to add a FC7000-100 to your set up. This will allow the ce3000mk2 to read the reg marks correctly. Use the ce3000mk2 setup for cut vinyl, but when you...

  21. The place to be

    Welcome from PA!
Top