Search results

Have you done this before? I’m concerned the lamination on top of lamination will fail. You can get thickness through the film you are using. What product are you producing?

If it’s your first printer, the s40 is the best bang for the buck. The s80 has an enormous color gamut, but it’s not nrmecessary for most businesses. The white is milky and the silver is expensive and almost a waste. The s60!is a nice option but you can almost buy 2 s40s for one s60/s80

if you are covered with a warranty, you can have hp service your printers or an authorized service provider(reseller) Unfortunately your printer is never down when you have a project due. There will be more service options with hp. Epson is primarily manufacturer support. There are few dealer...

Did you plug the encoder sensor strip in backwards in the carriage board?

Uni directional printing…re linearize your profile…

If laminating you need almost no overcoat. Is the laminate pealing off the edges of the arm? How can much tension is on film when applying? You should use cast film on arch. What is the ink coverage? Is it black background? Did you make a custom profile or are you using a canned profile?

There is a difference between a demo unit and a try and buy. I think if you found out the usage early enough you have grounds for bait and switch. Sadly once a reseller has your money, you are just a number. I’d go public with the salesperson and company. Maybe a few lost sales will do them some...

Correct. Onyx cannot calculate hp ink usage. You need to use print os

Why do you need banner to outta before putting in a retractable display? I use 10mil anti curl film in lieu of banner material. The s80 should be dry and ready to handle 3min after print finished. If blacks are wet you are laying down way too much ink 100/20/20/20 is all you need

Did they replace the dampers as well? If they used the original it could be an issue. Aldo just make surge guards are clean.

Onyx will allow connection to the 300 series printers I’m sure it will on 700-800 however you can only use it to linearize profiles and make basic profiles. Limited swatches.

go on any printer on their network open up a web browser and type in the printer's ip address

sorry for delay....the rails will absolutely devolve a bow from the carriage if the bushings wear out and printer is continuously run. This will leave the printer useless.

Run a usage report. Run finger across carriage rail. If a rail is not oiled properly it will develop a grove. The rail in an hp cannot be replaced

you may need to use another profile that has 2 pass as an option. They may not have allowed for 2 pass because the quality would be unacceptable.

are you set up to print only? set your printer to store. Send your files, then load media, then go to queue and release

Every profile you download or receive from a manufacturer or even another printer needs to be configured to your environment. HP creates their profiles in a lab with perfect conditions probably in Barcelona or Alpharetta. Two different parts of the world, probably same controlled variables in...

You have had a printer for 6 years, required 1 service and now you need to replace a few Pips at $175ea? Id say you have gotten your money's worth. Have you had a PM service performed on the printer? You probably have some wear and tear parts needing some love. You can spend $2k and put the...

if you are going through that much cyan, you should nix both of these platforms and look at the Colorado...$.08/sq'

There is a pdf Pantone file you can print from the onyx samples folder that loads on your computer. Does your profile match the media you are printing on? you need to start there or purchase an eye1. If you follow any of the suggestions above you will get where you are going. Noone will have a...