Search results

colorado M series if you have the budget or Epson s40, 60 80

There should be a profile that downloads to leave a polished edge. It really just does a second pass to clean it up. Keep in mind, if you use your router bit for anything other than acrylic it will not give your the best edge. The router should be warmed up first as well. And if you specifically...

I can see that being an issue on the smaller table. I almost ordered that one...

I believe they had a promo at the last show that is still running.

I run 18 and 24 point all day long from Lindenmeyer Available in 4x8 sheets

Bad idea and if an inspection is required, it will fail.

Aren’t your segments controlled by your table size? I’m not sure where I would ever need to control a segment. I have a 5x10 Colex with conveyer, we throw a full roll of graphics printed through onyx and it cuts beginning to end with zero interaction. I am using a Summa basket in the front end...

It really doesn’t matter where you hardware or software is made..what matters is where it’s supported from.

You can get a Mac mini with their new M2 chip and have zero issues for the next five years…if you need multiple monitors (3) jump to the Mac Studio.

Take a look at Onyx Align…complete view of your business production and inspire into your true costs. Your going to need a software tip to drive your new flatbed printer and cutter..add this to the front end and you can drop jobs right into your top as you open a work order….

only way to get a service manual is to go the Alpharetta and take service training. as far as I know

79:04 is a generic firmware error. In the service manual I believe it is about 15 pages of items to check. I would remove all media from printer, power off and remove all printheads and ink cartridges. Unplug for 5 minutes, open the hood, plug back in and power up. The printer will tell you to...

Just because you are buying his business, doesn't necessarily translate to retaining his clients. Are any of them under contract? If so you want to speak with them to see if they will honor the transfer of the contract to you. It does not sound like he has any printing equipment if outsourcing...

thanks Mark

Mark, do you have a link for that website?

You should be printing at a slower speed with the metallic ink. I would check your profile, you may be dumping too much on the media. Ive installed, trained, serviced and now print with this platform. Zero drying issues.

Epson Display Trans Backlit Film

The dryer is for the s60 only. No need for it on the s40 or s80. The IQ off of the Epson surecolor is better than anything on the market in the sub 20k price range, Panel to panel line up is spot on. Honestly you may only need the s40. I run two, backlit prints all day long...

You will not require a dryer for the printer. The s60 has a dryer because it's a dual head CMYK printer designed for speed. The s80 is the same dual head, just utilizes the channels differently. You don't need to run the printer with silver or white, you can keep a cleaning cartridge in to keep...

no budget, Colorado M...fantastic printer, panel to panel line up is superb. Next if you need ink, epson s80, if you don't need white ink you can go with the s40 or the faster s60. The Epson Surecolor panel to panel is great. second to the M