Search results

This are several steps of assembly and adjustment. Better check for a service manual.

You need the driver files for your printer too. Onyx 10 is really old, good luck.

The first adress for summa spare parts is a summa dealer. The tool holder part is not available separate from the body.

You will not get any Flexi 8.6-Install files per official downloads anymore, perhaps you are lucky and someone still have some (if you don´t). But even if you get a download, it is really possible that you run into problems, Flexi 8.5 is around 15 years old.

ColorCheck isn´t a tool to match pantone colors, it is a tool to check color consistency. Pantone colors are difficult to match because they are originally solid colors mixed out of 18 base colors, to reach colors not reproducable on 4C offset printing machines. There are swatches available...

The epson printers are really low maintenance. Just follow the documentation attached with the printer. Epson Edge Print is an easy to use RIP-Software, with no special key features.

Summa Winplot is downloadable for free on the Summa website.

I like the i1 Pro 3, the i1iO scan table is cool, but very expensive. Optional available for Onyx Thrive is ColorCheck, for process control. This will save data of a reference measurement swatch (best taken directly after a base calibration and profiling), and will compare it with later...

Because of varying environmental conditions like air temperature and humidity, together with material deviations, that mentioned differences are common. So the first step to have constant colors is to set up constant environmental conditions. In addition, most of this deviations can be...

I like it. I have a few customers with it, and it is unbeatable when using for example OPOS BARCODE or panelling. One time I was at a customers site for doing software support, and in the same room a S140T has processed complete vinyl rolls contour cutting without any user invention. It is a...

The Z-Series uses pigment inks, it is better than dye inks, but not as good as solvent inks. And pigment inks needing specially coated medias too. The Z-Series are mainly used for indoor applications on papers, like posters.

The HP T-Series Inks are not made for outdoor prints, they use mostly Dye-Inks which could visibly fade after a few weeks. And they need special coated media to print on.

Do you mean „Ethernet“ or „Internet“? It is no big trouble to set up a RIP-Computer and do ethernet cabling between this and the printer. The printer does not need an Internet connection, while it of course would help to download profiles and so on easily.

Most of the time it is the flat cable from the tool carriage to the mainboard.

Good luck.

The main board of the machine is just a PC-board. I dont know which operating system is running on that board.

The connector inside the printer is VGA, but I have tried to connect a VGA-Display one time for diagnosis (I made service on that machines), it havent worked. In addition there is - of course - a separate connector for touch (looks like 9-Pin-RS 232), no idea how to drive this.

You can set split lines manually by doing a right-click where you want them, or using the automatic split line feature in the third tab.

You should replace the belts too. The small belts on the motor, and the large belt driving the cutting head (a little bit expensive).

If your Cutter is set to a media size too small to read all marks and cut the printed job, this happens. The sizes doesn‘t need to match exactly.