Search results

This was it! Put a little thread tape on it and it was nice and snug, felt secure and then cuts improved greatly. Great suggestion as this helped so much!

They use Bell and Howell for service calls. https://www.royalsovereign.com/customer-support/contact-us.html

I just cut one sheet. All circles and the blade holder adjustment piece is definitely moving. The cuts started great, pretty ideal and as it moved up the sheet the cuts got deeper. The blade got turned out about 1/8th of a turn from where it had started. I'm going to only assume this is a worn...

Yeah I might have to adjust some things. I'm playing with different pressures for it now. The blade holder is definitely moving. The last sheet I just cut it actually got deeper the more I cut.

Possibly. I did change my overlam recently but I'm on my third roll and now just having problems. I'll try slowing it...I've moved my pinch rollers around a little but still the same result.

I had to cut another sheet this morning. It's only on one particular shape this is happening. I even rotated the image 180 to see if that would change anything. Set my blade and pressure to where I have it for these types of cuts. Test cut worked fine so I proceeded to to the whole sheet. First...

It's happened twice on the same job. I have a couple black marks on my blade holder so I can see how much I'm turning it when I adjust my depth. After I cut this sheet it had moved by almost a 1/4 turn. Very strange and not sure what to make of it. I reset the depth after and cut another sheet...

So this is new to me and not sure why it's even happening. I do die cut stickers on my D140. I do two passes for cuts to score them deep so they are easy to pop out. Well one sheet I tried yesterday, it started fine and a test cut was good, so I cut the whole sheet and when I pulled it I noticed...

I do this often. I step out the pieces in Illustrator on my sheets (ie: 8.5" x 11") Crop the artboard right to the edges of my stepped items. Then I draw one line across the entire width and another for the height and step those out across the sheet. Definitely saves a lot of cuts when you have...

I had similar issue on my SP-540V and replaced the scan motor and worked great. You might also have to replace the gear that the scan motor drives if it's damaged.

Nevermind...can delete this thread. It was a file saving issue and layer flattening.

I initiate the job in versaworks to cut only, submit it to start the cutting, it goes to processing on the machine for a few seconds but the cut head never even moves and then it stops processing like it's finished. Not really sure whats going on. I can do test cuts fine but this file isn't...

I'm looking to get an new laminator and cutter and would like some recommendations on dealers in the Northeast. I previously used Grimco for my equipment so no need to recommend them.

I tried some masking tape again, no success, I tried cutting out a registration mark from a printed sheet and pasting it over the printed mark, still no luck, I cut even more around that area to give it more white area and it still couldn't locate the mark. This is the only material I use that...

SummaCut D140. It Says its possible to do manual registration. I think I'm halfway there, but just missing some important steps. I set it to XY Adjustment, which I think is the right setting for this. I initiate the cutting through Onyx Cut Server via TCP/IP it asks to set the origin point then...

I'm not really sure I understand what you're trying to describe. Taking the registration marks which have been printed on white vinyl, which are .12" black squares for OPOS, and pasting them on the glitter? I might have 8-10 of those depending on how long my printed sheet is. I've tried putting...

I never got training on my machine. I only know what I've learned by trial and error mostly. I don't know how to set origins and stuff like that on this machine. All I know how to do is optical recognition with the OPOS.

If you're talking about this section, this is all it tells you. Otherwise it's all about OPOS that I can find. There is nothing I can find that tells you how to manually register marks. I see it tells you if it can't read them to register them manually but there isn't much in the way of...

So I have this red glitter material I print on for a customer and I've used my old Roland SP540 but I'm trying to get away from that. My summa cannot read these marks. I've tried taping over them and cutting out the reg mark, I've tried it with a yellow filter over my OPOS sensor and it might...

Welcome! I'm to the east of you in Maine. Lots of great info here!