Search results

That looks like an electrical issue. I'd start by unplugging the printer and check that all the ribbon cables to the board, carriage, and heads are clean, seated firm/ correctly, and that there's no ink or anything anywhere near the connectors.

It won't flow ink into the damper unless the valve is open. If you take the panel off the back side behind the ink cartridges you'll see all the solenoids that open the valves, first run a print with nothing but a yellow square and see if the yellow ones are opening, if not you have either a bad...

2023 was a great year for us. Other than our security personnel and greeters demanding more treats and toys in their 2024 contract, it looks like it'll be a pretty good year so far. Happy New Year everyone!

I'm not, and I will. Happy New Year :toasting:

I use TransferRite Ultra clear. After trying a bunch of different ones for one customer we provide graphics for that go on displays that was having issues. Theirs are print cut with a matte lam. Don't know if that'd work for you, but maybe worth trying. I use the medium tack (1310) for them, and...

Best remedy, get yer' check book out, contact Mimaki, and get a replacement top. I've had to replace them on a Fuji I used to run, one of the shop workers brought in a pallet of parts to print, ended up dumping it and put some dents in it. We tried to fix it, but it didn't work so well, affected...

I cringe when a customer provides vinyl with zero specs. They're usually looking more for pricing than what's actually right for the job.

Found this place... https://swingframes4sale.com/pages/usa-made-snap-frames-by-length

They're paying for it, inform them the cut line will show to cover your butt, get it laid, & get paid. The issues they've had in the past could be the installation technique, or the material might not be what the last guy thought it was either, and not right for the application.

Coal again? I... Am going to need a bigger coal bin. Merry Xmas everyone :toasting:

Doesn't matter how, it's always good when a problem is solved, and it's good that you followed up with the solution. This post might help someone else down the road with the same problem, so it'll serve a purpose.

I'm jealous...

If the permit process stuck to a reasonable cost and procedure to ensure things are done safe, to code, and that you were properly insured, few would have an issue. It insures safety, and also protects you from unqualified, uninsured, fly by night people taking jobs away from you. But yes, many...

When I do stealth reflective I print some decent sized color swatches on reflective that are in the color range, laminate so they'll have the final finish, stick em' around on the vehicle, let the customer check them in different light settings, and have them select what's closest to the desired...

I don't like cocaine, I just love the way it smells... :oops:

Another thing you can do is grab an IR thermometer and check the heaters all the way across to see if they're in the ballpark of the temp you have it set to. Just because it's hot doesn't mean the temp is what you set it to, or need to cure ink. It's rare, but I have seen issues where they're...

As far as the pot thing goes, I don't partake anymore, but the wife has MS and uses it. That disease is mainly "treating symptoms", and it helps with some of the stuff that conventional meds don't work for, and there's a lot of meds she can't take anymore because they were taking their toll on...

From the limited experience I've had with latex, temp and/ or cure time. Try running more passes, it'll print slower, but give the heat more time to cure it. Make sure your temps are high enough, but don't go overboard or you'll create other issues with messing up the adhesive and warping media...

Never heard of it either. First thing that would scare me off is there's nothing about expected life or vinyl type on Amazon, looked up V2's website, nothing there either. Is it a one year vinyl, a 5 year, 7 year, a craft vinyl they're passing off as automotive grade? Is it cast, calendared, or...

Plus one for the RGI products Todd Jelle recommended. https://realgoldinc.myshopify.com/