Search results

Does Not your Printer have Ethernet Port?

Special Items should show if a cutline on the artwork. there are 2 reasons for that. 1. there is no stroke coloured SPOT color named CutContour. in your artwork - Sed me your file. I can check it for you. 2. there is a Bug in VW5. might need to reinstall - Run VW5 setup as Administrator...

1. For serial connected cutter the handShake needs to setup correctly (HardWire) to avoid memory overflow. It could cause unfinished jobs. 2. There is a STEP SIZE setting in the cutter. You need to set the same in your cutting software. 0.025 mm/step = 1016 steps/inch PM me if need help with any...

It is all about tool Positions. Position 1 is the back slot, Position 3 is the front slot. check the condition you sending the job. Assign Tool option shows each condition setting,

They not support it does not mean cannot be used

192.168.1.25 0r either 192.168.1.100 are likely assigned by DHCP server, to other new connected Devices. could cause IP conflict in the future. Choosing higher number for the printer could make IP conflict unlikely. For ex. 192.168.1.241 , Narrowing the DHCP range in the router. Leaving safely...

Network does not need Driver. only valid IP setup.

The original remains, you can release the clipping mask any time. If you need multiple clippings, you need to have an other copy of the image.

Did not say What Software. In Flexi select Print Color Bands. Not sure how VersaWorks does it.

LCD and touch Screen are the weak part of S1. Summa only sells color S2 displays now, and for that need a S2 motherboard. Leaves S1 boards as spare. Should have spare S1 boards hanging around because of that, on the market. Good luck to find one. I am not in the US, cannot help with services.

Yes. many times. In old summa mainboards the Motorola processors as well.

Driver Chip $2 MainBoard $400-$500.

Stroke size does not effects the cut in the Rip. If it was true, 0.001 would have 2 sides as well. but only if you convert Stroke to outline. One of The main mistake the default vectorizing method 2 colors. Should choose silhouette. or Flatten transparency has an default option to Convert Stroke...

Ambient, or Chateau de Garage, without Shadow.

It is always a reason for it. In Illustrator you can find it out, if there are double lines. in Rasterlink if sending 2 passes.

You have all the things to try. They probably do not say or want to support it.

Only if you understand what does it mean. for example if you want to cut the same ways all colors.

Change the Driver options only for the color you want to Flex Cut.

He was probably wrong saying SERIAL. Edge does not have serial port. And Yes, Edge 2 works with the Gerber USB-Printer Cable and Omega 6 on Win 10 or 11.

Only VS-640i supported