Search results

if you have to do this again go get an electric carving knife

banner is going to be cheaper and easier

If someone wants to steal, they will do just that. we use the following steps when proofing. via E-mail the there is a disclaimer in the body that states This email and /or attachments may not be forwarded, printed, scanned or altered in any way without written permission of the sender. All...

need to make sure you have permission to do the work. usually the company that is leasing the billboard requires that they be the ones who also does the graphics. Lamar comes to mind as having strict rules on this if you can then ratchet strap the banner material into place, pole pockets...

depends on the QTY, if just a few then do it by hand would suggest a applying vinyl and then cutting along the edge of the vinyl or there are several Merchant Members here who do this service,

also use DigiPrint http://www.digiprint-supplies.com/ been very happy with the products / services and pricing

exactly how we operate, and surprise surprise they usually can find the needed file format the file size is a mute point, had customer bring in a low res image. we said no and needed it in a high res. so they scanned same image (could see the stain on the paper) and re-saved as a high res JPG

Guarantee https://www.geminisignproducts.com/en/plaques/plaques/ada--wayfinding/ comes with a Lifetime Guarantee, so outdoor grade is good to go

according to Facebook, these signs were made by Sign Pro Plus https://www.facebook.com/SignProPlus/photos/pb.162757320510428.-2207520000.1459480973./912951145491038/?type=3&theater made they can make them to the specs you need

I saw that and assumed it was the total size from 2 boards 48 x 96.

you heat before you lay on the glass, as in just a couple of inches off of the glass. yes you can get while on the glass. granted you have to be careful and also be aware of the ambient temp. Don't heat if its cold

We are currently getting the Main Tape PreView Plus GXF100 tape, which is a medium tack. However, there is a discrepancy in pricing and they are not honoring what is listed on their site. so, what clear transfer tapes are others using and/or has had good luck with and is a medium tack.

This, VersaWorks will give you an estimated ink usage ratio and you can go from there. We use Caldera and this also gives you an estimate cost for the inks however, you will also need to take into account the ink that is used for cleaning, (both manual and automatic) ink in the lines, and the...

you may want to check with the regs as DOT and city street / regulatory signs usually require them to be produced a certain way. either DGP or HIP reflecting background with a translucent overlay or could be screen printed information.

is it across all material or only this job? Could it be a contaminated roll?

www.grimco.com they have the blanks already installed with the reflective material and depending on the type of sign also have the regulations for that state

those are done with a UV flatbed printer, the domed/rounded lettering and the color gap at the base of the letters. Romark has this line of machines, I thought that they offer turnkey services? Direct Color Systems also does this type of signs

loose the tripod, and the birds? (not sure whatever that is above the camera) IMO, there were stronger options already shown

assuming it is a solid glass rear window, we would be $179, cast printed with lamination & installation you say you are just getting started, but your profiles says you been here since 2007..... borrowing an account or been MIA

would offer them 3 pricing options 1. like Brad suggested hidden frame with 2 substrates 2. same frame and construction, except only use 1 skin, finished would look like the "hospital" sign seeing the frame on one side 3. no frame, using the sign substrate only