Search results

I know it's going old school, but then, a SummaSign Pro of a different color should be alive and well longer than a decade. So if anyone has or knows of one, it would be a appreciated if you could let me know at jim@koios.us. Thanks! Jim

Signwarehouse is your best bet at 800 699 5514.

Some reflectives, maybe. But that sounds like a bit of over-stating, which isn't needed with Summa's cutter marketing (scold them!!! :), since they're the BEST, accuracy wise. And every sensor type system is problematic with reflectives, save that of the CCD camera sensors, like iCut...

Yes. See what your settings are for the size of your marks (default is 3mm square, I seem to recall) and print a bunch of them, spaced about 3 inches apart, on white vinyl. Then manually cut out the pieces, leaving some room for the sensor to scan around as it does. If it picks up anything...

Precisely. The reflective disperses the light in all directions, defeating the sensor. Another way is to cut squares of white vinyl, with a cutout the size of the OPOS mark (typically 3mm square) in the middle, and lay that over the top, leaving the mark exposed through the cutout. What...

Print OPOS marks at the center of 3-inch square pieces of white vinyl, and place that over the printed marks on your reflective.

Dome it, and charge through the roof. :)

Worn or clogged blade-holder could be the culprit, causing waves due to hampered blade rotation. Check to see if bits of adhesive or vinyl are mucking things up, and if so, clean and lubricate the blade-holder and you should be golden.

Yeah; that. If you have a laptop and a design program you bought or pirated (Corel/Adobe) and lost your job or cannot find one, a single Unemployment Check can get you into the "business" for about $3 to $5 hundred bux. An espresso machine, even at the low end, is north of $2 grand, and a...

Another option, especially since you seem to be focusing mostly on indoor, would be liquid lamination, to start out. Then when your business supports it, spend heavy on the laminator, since the better ones are pure heaven, while cheaper ones can be a real pain to work with. Also, the...

I think an upgrade is needed. Call 800 699 5514 and check with sales or support.

+1 for Wasatch. Amazing halftone rendering.

Microfiber instead of felt-covered squeegee. :-) Yellotools.com

http://www.signtrader.com/ :)

+1 to call, or email a friend in Texas. :) 800 699 5514 support@signwarehouse.com

And on occassion some stop themselves: https://www.google.com/search?q=dumbest+criminals+videos&sourceid=ie7&rls=com.microsoft:en-US&ie=utf8&oe=utf8 LOL

Hi Geminis076, I believe if when ordering online, the sales person attached to your account is credited for the sale. But I'll look into it and get back with a definitive answer on that. Meanwhile, kudos for your loyalty to the person who's been helping you over the phone. Awesome...

Fair enough. Yeah; it's awful when we spend hours on the phone with a customer and cannot sleuth it. The customer suffers, we pull our hair out, and in the end, the problem remains, and maybe the cutter needs to come back to us, for service or to be replaced. It can happen, and more so in...

I think you were attracted by the thousands you saved when buying your equipment from us. Is that a fair assumption? And yeah, we're able to offer great prices because we have large, centralized locations in TX and KY, where we offer depot-service, that's top-notch. In fact, we're not just...

Thanks, 401Graphics! Our EnduraMask is a great, and affordable tape, too. ( http://www.signwarehouse.com/c-application-tape.html ) Best regards and have a great Thanksgiving, Jim