I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
It is part of the umbilical in the printer that also has the ink lines. As the umbilical moves back and forth with the carriage it rubes against the ink lines and the clips that hold it all together causing the outside shielding to wear out. Once that happens the electrical wires within the...
The trailing cable is the cable that sends the data from the lower parts of the printer to the board on the carriage. The OP's cable failed and as the cable is bent in the failed spot it causes communication issues to the carriage board and that causes the print heads to fire. The heads are...
The trailing cable in the printer failed. If you are in the US you can purchase it from our website and install it yourself.
https://www.thegrs.com/item.asp?id=2ET72-67020&Type=0
The problem with HP’s US technical support is typically caused by the “national” HP 2-in-1 Resellers that only ship a box and don’t train the end user and give little to no support after the sale. This fills HP’s call queue up with calls for basic support questions and causes delays in replies...
HP Polestar was the code name for the HP Latex 700/800 Series when it was under development. I haven't tried it on my demo unit but that would probably be the one to use.
Hi there! Krista from GRS speaking - I've attached direct links to Flexi's new training courses through their company designated for Flexi training called Adendo. It's run by Mark Rugen and Mark Stevens. Feel free to look through those and see if training on this may help.
FLEXI offers ADENDO...
I haven't seen that yet in any of our installs. Are you on the latest version of GoSign? How are you saving the files and how are you opening them in GoSign? Are you using the Illustrator plugin or just saving pdf files and manually opening them in GoSign? Does the i show up in GoSign and...
I had a customer with a similar issue on their 800W with a paper. Below are the steps I gave them to correct the issue and disabling the OMAS sensor on that media fixed their issue.
OMAS Issues
The OMAS sensor is in the platen of the printer about 12 to 18 inches in from the right side. Make...
If the substrate database is messed up in Flexi, close Flexi and Production Manager. Then delete anything related to that HP printer from the DriverSettings folder shown below. Then go into the ICCProfile Folder and delete any profiles for that HP printer. Once you open Production manager...
Below is from the service manual. Is there something specific that you are doing that is causing the error? When does the error show up?
E10016 Internal error %i!
Internal errors are failures on the mainboard itself. Reason can be hardware or an firmware error (such as division by zero)...
Our accounting firm is doing the same thing with us this year. Apparently the IRS has a new requirement that if you made any payments to any individual or any unincorporated business of over $600 then a 1099 form needs to be issued and filed with the IRS. From what our accountant tells us the...
This is UV DTF, it is not the same thing as the DTF used for apparel. The naming is a little confusing.
There are two sheets of material for UV DTF, an A Sheet and a B Sheet. The A sheet has the permanent adhesive on it. You print with a UV printer onto the A sheet and apply the B sheet with...
Below is my understanding of the three settings.
-Input tension: Controls the tension between the supply roller (the one that you put the roll of material on to) and the grit roller/pinch rollers during printing / forward movement.
-Backward tension: Controls the tension between the supply...
The licenses and software installation media for all versions of Flexi since version 11 are done thru https://www.saicloud.com. Try to log into that website and you should be able to redownload it. Since you can't unlicensed the old computer correctly there will be a button on the SAi cloud...
We just moved into a new house so this was our first Halloween at this house as well. We moved from one end of the town to the other and we normally would get 20 to 30 groups with around 5 kids per group. Last night we got 2 groups with a total of 3 kids.
I don't know what the cost is for the Graphtec but Summa has the Tray One option for their S1 D60 cutter. PM me or send an email to sales@thegrs.com for more information.
Summa Tray One / Sheet Feeder for vinyl cutters Video
Thanks,
Chris
I see you are looking for end users of flatbed cutters and we sell and support the Summa F series cutters. I am not certain of your location but we can supply you names of four installs of units we have done in the tri-State area if you would like to speak with of them please private message me...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.