Search results

Update* I found that the 4th fuse (left to right) on the bottom was blown, I have replaced it twice now, and every time I turn on the press it blows. I am starting to run out of spare fuses.

The motion controller is dead on my Gandi, and this has happened a couple years ago, I remember replacing a fuse and the problem was solved, I am hoping that is the case again, but I do not remember which fuse to look at. and I think our service tech. is on vacation, does anyone know how I can...

what kind of die do you have that is for pvc?

Sorry I did not get back to you! We have been really busy with the Holidays. I have not resolved the issues, I have just been kind of working around them. You posted a picture of the left/right alignment, I have never touched those numbers.. How would I know what to adjust them to? The...

I just seen your ink questions We buy HyflexPC from Polymeric Imaging. Which a couple people have said is very aggressive for this press.. i suggested to my supervisor that we further investigate the ink. I.E. emptying the tank to make sure there isn't trash built up at the bottom of the tank...

The colors are ALL at 100%. all of my other jet outs are beautiful except for the black i showed you and light magenta has been iffy since I got the machine. The first sample was at 12 pass 100% Bi-Directional on coroplast. I am getting ready to leave for today so all i got a picture of was...

I could use some more advice.. I am having a few more problems with the Gandi Jeti 3150. First, My middle vacuum hose for the table has now collapsed for the second time. I'm not sure if it is for the same reason as the first time it happened. The first time there was a "tear" in the hose and...

Thank you so much! You have been nothing but helpful to me, I really appreciate it! I was actually able to get the screw back in, I was unaware there was a nut that slides around in there. After taking a closer look I was able to use a really small hex key to move it back in to place and fix...

i have an urgent question! I won't bother with the low vac tubes but right now I ran in to a problem.............. a screw came loose in one of my shutters for the UV lamps, it scratched my quartz glass, and it won't go back in, I think the hole that the screw goes in to is stripped. I even...

Sorry for the delay! We swapped our ink filters and the problem has not happened since. I will nag my supervisor to replace my low vac tubes, for they do have condensation built up in the lines. Within this month we have replaced all of our buildings compressed air lines, Thank you so much for...

I have not gotten any ink in the overflow. I am relatively new to this, just out of curiosity how did you learn all of the things to watch for? I really want to find a class or some sort of training for this press!

Check valves We replaced the check valves and the problem is still occurring. Any of the settings (i.e. Low vac and head voltage) were set by the technician himself. All of my tubing is black plastic so I cannot visually check the lines. This printer has been one problem after another, I am...

Res. levels My reservoir levels are taking a long time to fill up, what would you like a picture of?

Hello, I am a Novice at operating the Gandi Jeti 3150. It is a 6 color with fedora core. I am running a hot job and I keep losing my black heads in bank A, the front head in bank A is brand new. I am running at 12 pass / 100% density. This job needs all 4 black heads. The Tech that I called last...

Signs 101 Network RegistryIn what country are you located? United States of America In what state or province are you located? Minnesota In what city or town are you located? Spring Lake Park What large city is nearest you? Minneapolis Check all items that apply to your...