Search results

I am seeking the manufacturer of the media belt that is used on CET, Flora, Handtop and I think EFI printers. I have a need for 2 different sizes. It seems like a pretty generic part aside the spec of the size. Needed for CET Q5-250H and the 1000. Cant believe i cant find it anywhere on the...

Get yourself a fabric tape measure (a tailor's tape measure) about 10 feet long, and measure off both sides of the input roller to the take up (in a loop fashion). Your input roll is not square causing everything to skew. Get it down to the mm and you'll be right as rain.

Try taking that same image and using the EWS of the printer (type IP of printer in a web browser) send it to the printer. See what kind of results you get. My bet is flexi is doing flexi stuff screwing with your image.

I would say this: When at a trade show if you have a chance to see people setting up these printers, look at whats easiest to put in place. that mimaki flatbed took almost all day to set up. The CET we set up was in place up and running in 2 hours. Forget about Oce.

Static Guard! Remember the commercials from the 80's... (girl in the red dress) works well on boards.

I guess we need more information. What exactly are you looking to override... If you need more or less passes you can get this done with the media profile. if you think the printer is failing you, we need to see some pics.

need nozzle pattern pictures

Almost looks like you might have something dragging as it only seems to be going in one direction. get a good look at the bottom of the carriage. Clean spit sponge

Please send a pic of the left side carriage of Seiko H model, in particular, I need the head height flag, not the plunger. Because my client needs a pic to clean the dirty sensor which is normally behind the black cover i believe. Just need a pic thats all, Thank you!

That test print of the 360... You need to upgrade firmware, and replace that lycysn lt mag head. That will fix that "smile" in your alignment pattern.

Nope You will most likley need to buy upgrade. Call them, sales can help.

solution Visual Magnetics

Y axis test If you take off the right cover and see the main board, you can switch the Y and X encoder wires, (labeled) then start the cutter, if the issue moves to the X axis its the Main Board Bad. If it stays at the Y, it could be a motor. Check belts for fray and wear while in there. Gluck

Id take a 4X8 CET flatbed. Having installed about 6 now and few issues about them, they look good and the speed is in the $$$/more heads faster speed if you need it. Have a client using it everyday in NYC with white, Put it in there 3 years ago, had 1 service call for something stupid. Also had...

Skew fix If you think the roll is moving, get some hose the size of the shaft, with a hose clamp and a thumb screw and it will never move again. as stated above... make sure everything is square. You can have bad rollers all day but with proper adjustment, you can do it!

Hey Your looking at the Black? LOL, Your cyan head is shot (might be lt cyan). Check under carriage for any hairs that might be there is clean, change the sponge next to the wiper assy. change caps if they havent been changed in a year, if it doesnt come around your in need of heads. Dont run...

Guam 3M I used to live there, worked in Harmon and Agat, problem with getting media to you is the boat ride. Media doesn't do well cooked in a box for a month at sea as we have seen in America with stuff coming over from Asia.. If we can work out shipping we can get you quality product, if you...

CET The CET and flora are different animals, similar but different. Print files using 600X900 on CET youll find yourself good. I had a guy that bought a flora and told me he was having problems with it, sure enough it went down while I was on site. (not my printer) CET is a simple printer...

IMHO Flexi has issues with cutting. if you can use versaworks you'd be better off with cutting. try a different file format. use export as eps to try to alleviate issues. -Me

HA! Is this my co-worker tawkin? I to have had multi issues with the lt cy/mg in these things. look at it this way...(they just need 2 instead of 1) YOU ARE NOT ALONE! in this fight.