Search results

Hey All, I am starting to accumulate a ton of these plastic pad plugs (the core plugs on end of vinyl rolls). What do you all do with them? Just chuck them in the garbage? Does anyone have any good uses for them?

Are you using the briteline 3203 profile? I have a 315 and I had to turn the temps down to about 209-212. Also, Sometimes on media I have to take a ruler and stick it up there and push the media down until it starts coming out of the curing zone. I typically have more of an issue in the summer...

I know to oil the bottom rail. I just wasn't sure if you put oil on the felt. I couldn't find that in the service manual

I have the same issue. I was wondering if I should oil up the felt on the bottom rail or not. Any advice? I have the 315

Customer just wanted a 1 piece sheet. Bengt, I didn't think about normal print/cut and putting it on clear. I can do that no problem. That makes things much easier. Gino, with the logo it seems it will likely be around 5". I haven't had any issues up to this point with regulations or anything...

Hi All, I am looking for a printer that can print a logo on clear vinyl. The rectangle of clear would be roughly 26"x6" and the logo will be red and white. I would normally print them but do not print white. I am not sure yet how many the customer wants but probably 10-100. Customer wants a...

Thanks. I am going to test some vinyls on it to see what works best. They stick it outside but only for the week long fair so it needs to be durable but not excessive.

I have attached a few pictures. Take the side cover off and you will see it looks just like my pictures. I am not a HP tech but I figured all this out with the help of Grafx Network. They couldn't send a tech out due to covid back then so I had to do it myself. 1) could be the pip sensor...

Hi Everyone, I got a request to apply some decals to a portable hand wash station that popped up everywhere after Covid. What material do you guys use to wrap them? It is the plastic, not the aluminum style. I am thinking standard cast either 180 or 1105 but wanted to see what everyone else...

I have had some luck. depends on what shape. what I have typically noticed is I need to slow it WAAAAAY down and make sure when you print, it doesn't shrink the film on top at all. My settings are typically set at 200g for cutting it, although you will need to test yourself and velocity at about...

Any tips on how to remove the badges in the stamps here? Typically I use fishing line but can't get that in these. They sit down inside the stamp.

Hey everyone, I was sent a job to install vehicle graphics by a 3rd party. I am only the installer. designer put a full wrap on the tailgate of a Tacoma and it has the stamped and black badges in each letter- picture attached. Also, there will be text that migrates this way into the T and A...

Hey all, I am looking for a supplier that can print a 20ft tall x 40ft wide fabric banner that is not see through. Would need some sort of grommet option on top. My customer wants to do an unveiling and either pull it to a side or just let it drop to reveal what is behind the covering. I...

I need some help and not sure if this is possible. I have a customer that had an old airstream redone as a food truck. They gave me paint codes of an orange color to use that in their logo. Is there a way to transfer those codes to CMYK? I tried scouring here and google and couldn't figure it...

Dang you're good. Thank you very much JR's

sign elements

Looking for some help on this font. I can't find a match. Thanks for help in advance

2nd on B2signs

Yea if it was still in the shop and just have to keep it longer I agree. However, with 3M you never know if it will stick or not whether its cast or calendared LOL

what type of truck? Did you use primer 94? What do you consider long term? 2 years? 5 years? And was it a full wrap bumpers and all?