1324

Hello signs101 guru's, im having very odd problems with my mutoh valuejet 1324x. i was having 1 in streaks of pink/magenta at the start of my prints and pretty bad banding (pic with the pink and banding) i ended up switching out the dampers and maintenance station. the problem persisted...

My 1324 will barely print anything at all. I removed the dampers and CMY have 2 colors in them, and K is solid black. K also prints the best. But I am using a lot of C&Y to print some custom Ukrainian flag designs. Is that a problem with the dampers? If so, is that all I need to replace? Does...

After replacing the 4 Head cables I received this error "E075Err Head Temp", cables were not OEM and after putting the Original cables back into the Machine error is gone but I am unable to print anything, nozzle check don't show and no ink is coming out of the head, everything else seems to be...

I replaced the maintenance station and dampers along with the joint going into the Y cartridge holder because it had a leak. Now none of the ink will charge. I've tried many times, both normal and little ink charge and several cleanings. I can pull ink to the head with a syringe but it starts...

I have a VJ1324XS and until last week it was fine. Last week a nozzle check showed black was missing some lines. A couple strong cleanings resolved the issue. About 5 days later with no printing, it's worse on the nozzle check for black. Strong cleanings have no effect, filling the tray with...

I am looking for Mutoh 1324 printhead(s) I picked up a couple printers that had sat for a while, both function other than almost no ink at all coming from one, and only cyan and black working from the other with a hint of magenta and yellow. Ive tried cleaning, and its time to just buy a new...

I have a Mutoh VJ-1324 and I've noticed lately it prints .25" short every 48". By the time I print a a 4x8' I'm a .25" short the one way and a .5" short the long direction. I've checked the RIP and it is printing 100%. Any quick way to solve this? thanks, Bryce

So what causes this banding? I'm using the Arlon 3mil 720x720 G2 profile in Flexi Production Manager. I switched to the Arlon 720x720 G4 profile and it went away but the dots are not as fine. Is it the Arlon material or the profile? I'm confused on this. I've had different material give banding...

Now thru September 30th, 2013 trade in any wide format printer 30" or larger and receive huge discounts on the ValueJet 1324, 1624, 1638 and 2638. Terms and conditions apply, contact GRS for more details. Click the below links for more information on the printers. Mutoh ValueJet 1324 - $4,000...

I have 4 Direct Color Systems 1324 direct jet printers for sale in Southern Colorado. They vary in use from 1.25 to 2.25 years but were spotlessly maintained though one has a broken carriage cover hinge which happened when we prepped to DCS specs for storage. See...