cet

Used CET Q1000 5'x10' flatbed printer. Set up as CMYKW, but can be easily changed to dual row CMYK. She uses Ricoh Gen5 printheads and is serviced regularly by a CET tech. The machine has an upgraded negative air system that saves you during power outages. Included is the computer, screen...

What is the value of late 2012 CET Flatbed printer 4x8 CMYK plus W? Trying to figure what its current value might be - I believe they went for $150k when new. Thanks

Hello everyone, we are just doing some casual shopping around for new UV Ink supplier. We have no issues with our current supplier, just looking around. I found a site called Nazdar and they have inks, they are not named like "96 Series" but I do believe they run in our machine. I was wondering...

I am seeking the manufacturer of the media belt that is used on CET, Flora, Handtop and I think EFI printers. I have a need for 2 different sizes. It seems like a pretty generic part aside the spec of the size. Needed for CET Q5-250H and the 1000. Cant believe i cant find it anywhere on the...

I cautiously post, hoping that a link to our auction is OK: Express Graphics Relocation / Merger Surplus Auction We have a lot of good stuff, and a good story ... of merging and purging and all of that. We are a small shop, with a big heart. We have good old grommet machines that we bought...

Anyone have experience with ITI (Inkjet Technogies)? apparently they were an OEM for many big co.'s for yrs but decided to market their own machines (out of Ft. Worth.) Their ITI 2512 model is on-par (spec-wise) with the CET Q5-500, but about $5K+ less. Looking for a new 4x8 fixed-bed (about...

Hello All - We have a 126" CET Hybrid printer. We have found a need for printing media larger than 98" quite often, but we see a common problem when printing on larger media, the material seems to buckle in the middle which creates headstrikes! The CET does come with a dancer bar on the back...

Does anyone know the proper size of the ink tubing used on a gen4 head? Lots of sizes in tubing out there and don't want to use the wrong size!

I just upgraded to Onyx 11.1 to ready for a new HP Scitex install. I also have a CET Xpress 500 which was running fine on Onyx 10.1. However when I download the print install from Onyx, the files will not print. Onyx does a print to file with the CET and now it is sending a prn file and a bmp...

Hey Folks, Just curious if anyone has seen this type of sudden color dropout from a CET printer. We are running an X-Press Q-1000 (10 heads) and are experiencing color dropout while printing and then it will show up in the nozzle test - see attached photo. I know there's not much information...

We have our Q500 4'x8' for about a year and a half - operational about a year. When it was delivered we ran through massive issues for a few months incurring losses as we couldnt print anything or market our business. Lost a whole season. Finally they narrowed down last issue to bed being...

We are looking to buy a used flatbed printer Currently we are interested only in Arizona GT's and X-Series X500 but if there are reasonable offers for similar printers i.e Agfa Anapurna M2050 or EFI Vultec t1000 we will listen to it If you have some information contact me here or directly on my...

printed on our cet flatbed

Has anyone seen or used one? I am down to deciding between their Hybrid and a FB500. I've been able to find enough folks who've had trouble with the HPs that it gives me pause, but nothing really about the CETs. Thoughts?