• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

#firmware

  1.

    Newest Summa S2 Class firmware removes FlexCut features

    So I upgraded the firmware on my S2 T140. Easy process, I've done it before with no problems. Latest firmware is version 026 from 04-19-2022. After I upgraded I found out that on the newest firmware they removed the "FlexCut Mode" button in the FlexCut menu, this also removes the options for...
    • Snap2000
    • Thread
    • #airmmark #firmware #flexcut #s2class #s2 #summa #summacut
    • Replies: 5
    • Forum: Summa

  2. Need Help Epson 11880 keeps rebooting on its own

    We are running two Epson 11880s, and one has started sporadically rebooting while idle the past couple of weeks. Any ideas as to what would cause this and how to stop it? I couldn't find anything in my research. Thanks, David

  3. Roland PNC 5000 Pinch Roller Sensor Detection Error

    Hi All I have been scratching my head and trying to work out how I can override the pinch roller Sensor stage on my PNC 5000. I've been having issues with the detection. I press setup the carriage moves to the middle then back to home position again on the left hand side. I've checked the reed...

  4. SP-300v failed to open port when pushing firmware

    Hey, so I installed a new motherboard onto my sp-300v versacamm and I am getting a sum error. I installed a new battery, downloaded the firmware, and even obtained the peck (peck6) tool to send the firmware over to the printer. I boot into the update push mode, but when it goes to push the...
Top