lighting

The 9W RGB+CCT Outdoor Sconces Wall Lights are available, square and round shapes available and the color of the shell is black. follow the Zigbee 3.0 standard protocol, which can be controlled by Zigbee Remote and APP to set the color, and adjust the color temperature and brightness for various...

The LED Light Channels for Cove Lighting, easy to install the LED Strips inside as the light source and mount them on the wall or ceiling. the length and colors are customizable, max length can do 6M and cuttable. the PC diffused diffuser for smooth light output. the light inside spreads out...

We are a growing family business looking to partner up with a company that can out source contract work to us. I am an Installer located in Haines city FL. I try to focus on designing Installing graphicsto Mallsand Storesbut... I do vinyl graphics installation, production and design work...

I've only replaced or installed the florescent lighting. I've got a customer that we are replacing the guts of an existing 3x5 box sign. I told him I think now would be the time to go to LED Strip lighting since we are having a hard time getting the lights now. What do you recommend for the...

We replaced 4 large acrylic signs 2) 4'x8' and 2) 5'x10' 3'16" acrylic panels printed on Avery translucent vinyl on an HP360 with the rip settings to max ink density (supposed to be comparable to double striking). We also had an electrician retrofit the box with LEDs. All 4 of these are...

I am working with an old brick building-(picture of building- not sign) Due to the nature of the building and no good back wall access... I have to run conduit and connect the lights (All exterior work) All the fixtures I find for lights have a small bases and intended to have a penetration...

USHIO Utopia High-End S14 2-watt LED Lamps for all your Electric Sign & General Lighting needs. For those not familiar with "USHIO of Japan", their well known for their Giant High Powered Quartz lighting seen beaming into space from the top of the Luxor hotel. Their specialty sign &...

Hello, Printer: Mimaki CJV30-130 Does anyone have any idea of why the led lights where the ink cartridges sit aren't lighting up anymore? The printer isn't registering that there are cartridges in and I can't print. Printer isn't under warranty anymore and of course I have a big job to do. Thanks

Hey guys, Thought I'd post this in the 3D section. Even though it's not really for "lighting" and "rendering", it's still 3D! I rendered this with MentalRay in Autodesk Maya 2012 a few years ago. I have more work I can dig up if anyone is interested. A lot more 3D models, since I enjoyed 3D...

Here are two enhanced Roland Ecosol printers with internal illumination installed. Very simple and inexpensive to do and offers a couple great advantages. And as I didn't fully trust the adhesive which came on the strips, I added a few 'drops' of clear silicone in areas unseen, just to be safe...