mimaki 150-160

Hello Guys, I want parameter mimaki jv33-160 ss21 Firmware 5.70 I habe error X over current, yesterday I was printed no problem today when turn on the printer i have this error I checked all cables and reconnect cables

Print runs fine in print mode, anytime i try print/cut it gets it cut mode, cut head shift inot position then freezes the printer would need to turn off and back on. Tried a test cut through the printer and same results. I get no error codes on screen, is it a bad board... bad cable ?

I have a Mimaki UCJV150-160 that I purchased in 2019 for sale, asking $7,000. It will need new ink and some TLC. I'm no longer in the printing business and need it gone.

Hello, Our shop has been having a lot of inconsistencies with our Mimaki CG-160fx. Some of the issues include, the blade will not lift up all the way and drags through the vinyl, sometimes the plotter doesn't cut the entire file or cuts too deep or too shallow. Also, we have encountered the...

Hi guys, it's been a while! I'm back here asking for some help with flat colors. I have to print a yellow box (#ffe600) on top of which there is a black logo with black text (#00000). This is the file that was provided to me (pdf) Now, if i print with my usual media profile, yellow came up a...

Hi all. I have a Mimaki CJV150-160. Its been an incredible machine for us for the past 4 years. Meticulously maintained, loved, and never ran hard. It worked perfectly until I moved it. I had the machine in a climate controlled room inside my shop in Southern California. I moved the machine as...

Recently replaced the board in my mimaki jv150-160 and we are using the bulk ink system. Since replacing the board I cannot get past a board test menu, reason being that the SLDH2 is not getting the voltage it is supposed to. I have replaced the fuses and still nothing seems to be working...

Hey guys quick question I find often on larger cut decals I'm having an issue where the cut doesn't line up. I am using register marks and have previously calibrated the print and cut in rasterlink and changed the offsets (on the printer) so it matches the print cut test with registration marks...

Hi guys new here i just started operating my mimaki cjv 150 about a month or so ago and I've been cutting cast vinyl not printable digital vinyl as I don't have a plotter big enough to do the current work I'm doing. im not sure if im supposed to be doing this but anyway to the topic. I've been...

Long Version: So since the pandemic business has been slow and so it takes awhile before we have to replace ink cartridges with some even expiring before we can use it all. I thought I had it all organized so with writing down the date I installed on them. Well after the holidays many of the...

Hey guys, Does anyone have a problem with this message in Mimaki CJV 150-160? System Halt (1) 1b4:PCB SLDR2H-F2 It appears during the start. Thank you for any ideas about what could case this problem.

When we try to switch to print or cut mode through the printer's interface the printer will adjust all the pinch rollers except for the last one (pinch roller #7). The unit will hover over it and then do nothing which brings up "PR Position Error". We realized that if the pinch roller is on...