mimaki

Hello All ! Machine - Mamaki cjv30-100 My black disappeared mid print which i suspected was the damper, it was late at night so i just set my head to soak overnight and when i came to change the damper in the morning my yellow had also gone. i swapped dampers on both and but only my black has...

I made the mistake of purchasing a lovely Besjet high-speed printer. It is excellent for printing things that are the same. It is lightning fast and a beast. It isn't want I need because the software isn't set up for companies who need to jig together many like files. So, I may sell it. But...

Hello guys! Bill here from Greece.. 2 days ago i got a mimaki cg61 cutting plotter <<Dinosaur>> . unfortunately the working pc has been toss to garbage by the wife of the owner who died . i have the plotter and its cables plus a CADlink adapter on the serial port side (to pc ) , i went at a...

Hey everyone! Chris here, We are running a mimaki cjv 150-75 , and I'm trying to broaden our services and do some canvas printing. Our images seem to be coming out a bit light, I have been trying to use a canvas profile in rasterlink 6, but the images don't seem to be as saturated as I would...

Hey all was wondering if anyone else had this problem before, Our JFX200 suddenly started printing with a lot more cyan showing in the final prints seemingly out of no where. the quality of the print seemed fine as all the lines where nice and sharp just everything looked as if a blue filter...

I'd like to know two things please: 1. Can you use SS21 orange ink on the Mimaki CJV30? 2. Everyone may remember that the Roland orange ink on the RF640 eight color machine would fade noticeably within 3 months. Anyone know about the permanence of the SS21 orange ink?

Hi All, we have a UCJV300-160 from Mimaki and we've never been able to get the print/cut function to work from files we lay out. We're using Rasterlink tools in illustrator - setting up files with Printed art on one layer, CutContour Spot color paths on another layer for cutting, saved as EPS...

Hi everyone, I’m looking for some help with my printer. I purchased a CJV150-75 that has sat for about a year. It will not print,expired ink,not stored properly and I’m sure the head is completely clogged. It shows no errors other then the expired ink. I was hoping someone could give me some...

Hello All ive been running my business a for a few years printing posters/stickers and car graphics. I am currently branching out into PVC banners, I did a test print and found the print looks bit washed out compared to standard vinyl and poster paper. can you give any advice on spec switches...

Hello All ive been running my business a for a few years printing posters/stickers and car graphics. I am currently branching out into PVC banners, I did a test print and found the print looks bit washed out compared to standard vinyl and poster paper. can you give any advice on spec switches...

Hi! does any one has already order from solventinkjet.com? Just want to be sure :D thank you!

I have a Mimaki CJV150 which had a new printhead installed last year. Has been working fine up to about a week ago. The Test print shows that all nozzles are perfectly fine but the print comes out very grainy. Has anyone got any tips?

To cut a long story short our cjv150 was dripping ink onto the media last week. We replaced the dampers and capot and the problem was resolved. This week we now have cross contamination in the yellow channel. This is present as soon as we turn the machine on after it has been left overnight and...

So someone had shared with me the way to get into the maintenance mode of my Mimaki UCJV300 by holding down F1 and F3 buttons on the printer at boot. It appears Mimaki has updated the process. I suspect they [Mimaki] added a specific time count to hold it as I caught the tech still using the F1...

Hello all! Newbie here. We are printing vinyl on our Mimaki UJV100-160. Everything prints out great, but after a few prints, Rasterlink 7 stops working. By not working, I mean: Sometimes it will give us a weird error message in the log (something about print & location) Sometimes it will...

Hello guys i'm new here, i recently got a mimaki ujf 6042mkII but i'm having some troubles ink filling, can someone help me please?

Hi, Has anyone ever come across wonky lines on the dot position adjust. Recently our machine has started to print certain patterns with wonky lines (see attached image). It looks like some sort of calibration issue but I cannot understand why it would just start doing this. Any help would be...

Hello all, i have mimaki ucjv300-160, i would like to know how can i speed up the RIP process in raster link rip software? any tips? Should i upgrad the RAM? Thanks

Hi all! I have acquired a Mimaki CG-130FX and cant seem to connect with Finecut. I have seen plenty of people with this issue here but nobody has posted the fix... -Windows 11 -Mimaki CG-130FX -Finecut 9 on Coreldraw 2021 -USB Connection Device is seen and connection check is ok but when I go...

Hey everyone, We are looking at our first flat bed printer and we’re considering the JFX200-2513 (Or the ex model). Would anyone be willing to share there experience (good or bad)? Anything we should know going into this printer? We currently run epson S80600 printers which are awesome...