#mutoh

Hello all you Sign makers, I need some help and hope someone can help me. I need to print and perf cut some stickers. I have a Roland SP 540v and a Mutoh Printer & Mutoh Cutter. And I use Flexi to control the Mutoh. But the Mutoh printer is not working correctly and the tech won’t be out here...

Hello, I have a mutoh valuejet 1324x that I use almost daily as my main printer, and yesterday it started printing magenta off after a head strike. I've run vertical and horizontal alignments, although I admittedly am not the most well versed in the DIY fixing of these printers. Does anyone have...

Extremely Clean NON-Working 60" Eco Solvent printer. 5 year old machine used for less than 500 prints. Unfortunately the machine was not properly stored. In an attempt to revive it, we replaced the dampers and maintenance station but stopping short of installing a new head. Great parts machine...

Which printer brand would you say is best overall for locating parts, technician for repairs and online / phone support?

Question: While printing, all of a sudden there is a loud vibration noise when the head unit is in motion. I went through and cleaned the rails & regreased, cleaned encoder strip, and metal rollers at the ends that the metal belt runs on. I have adjusted the belt and main supports for the...

I started having issue 2 days ago with the carriage almost finishes print and stops on left side then throws the code. I have cleaned the T-Fence/encoder strip. I tried to run another print - same thing. Double checked everything over tried running another print which it only printed the...

I have had bought/used this printer for over a year now. Back at the end of March I noticed what appears to be missing/white lines in prints now matter what media was used. I thought clogged head so did several head cleanings, ran long cleanings, soaked head, etc several times which seamed to...

Need a Mutoh Tech in the Brownsville/Mcallen Texas Area to service a Mutoh Valuejet 1614 ASAP. Need to install new printhead, data cable, flush lines, and check-up. Please contact Albert at 956-294-2510

Hi , I have a Mutoh Valuejet 1304 of 54 inch roll and i have a problem with width when printing . When i want to print anything the printer leaves me 3/4 centimeters on left side margin does not print across the entire media width . I mention that I use the RIP-Center Onyx10 program and i...

Hello! I'm seeking some assistance in getting my printer back up and running. I have been having some issues for a few weeks in getting black to print, all the other colors were printing. After taking apart the head and doing complete cleaning + ink charges, I found that the black side of the...

Hi. I know little English. google helps in this. I installed a new head and a new damper on the mutoh 1924wx machine, but everything is not normal. there is air in all pipes. I checked everything but there is no solution. When I inkcharge everything is fine, but after 5 minutes there is air in...

I'm working with the brothers Mutoh. VersaJet 1604A & Ultima SC-1400D. And they don't play well. I have worked many different peripherals and brands over the years and have never had the level of frustration & issues as I have with these 2. I know they are an older set-up, but it's all I have to...

We are offering our Mutoh Value Jet 1624 64" w/ take-up. New 1641 is here and we need more room. We have priced the machine to sell fast. $1,800. We currently use this machine everyday in our extra clean production area. It prints great! Machine comes with Inks that are in the machine plus...

Hi, I have a VJ1204 and it started doning his today (see photos) and now its just printing grey, nossle check is all good, what can cause this?

Hello I’m still trying to figure out my machine . Mutoh vj-1614 if anybody has a service manual or maintenance manual could you please email me a copy . oreallywraps@gmail.com Thank you

Need some help printer was saying not original on cyan and yellow put new chip reader in and updated firmware per tech.. now it says all inks are not original and all are and new. What could be problem? Thinking heather junction board but not sure and with virus no tech will come out dont want...

Hi Guys I was running our old mutoh 1204 valuejet the other day when it suffered a headstrike. Afterwards I ran a nozzle check and noticed the cyan was continuously firing (photo attached) IMG_20190331_195223 by Robert Parkin posted Apr 1, 2019 at 9:01 AM I detached the dampers, replaced the...

Does anyone have samples of what white ink looks like on colored media (not clear or white) when printed by a Mutoh 1628x?

Hi i have one mutoh rj900c with Wasatch softrip software version 6.7, now am facing a pblm that whatever i print the width of the print is almost double of the width of the actual file size. For example if am going to print a file of 10 inch width by 30 inch length then the print size will be 20...

Hello Everyone. I am new to this website and am just looking for some help. I have a Mutoh Valuejet 1204. I am having a problem where it is only printing from half of the Cyan nozzles. I have replaced the dampers and maintenance station recently and it seemed to temporarily fix the problem...