• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

nozzle problem

  1.

    Clogged Nozzles/Heads

    I'm working on the Epson SureColor S70670 and my Cyan/Magenta heads are clogged. I can't seem to get any progress here. Every nozzle check after cleaning countless times is the same issue. Any experienced insight would be very helpful. Thank you.
    • DesignerDecals
    • Thread
    • clogged head clogged print head epson surecolor s70670 nozzle check nozzle problem
    • Replies: 3
    • Forum: Newbie Forum
  2.

    Mimaki Deflected Cyan Nozzles CJV150

    Hi I have noticed the cyan nozzles have become slightly deflected and I am wondering if this is something I should be concerned about? The machine is 2 years old and has had the following work on it done Cap Top Replaced 6 Months Ago Wiper 2 weeks ago Pump still on Original never replaced...
    • Mathew Atkin
    • Thread
    • cjv150 deflections head deflection mimaki mimaki cjv 150 nozzle check nozzle missing nozzle problem
    • Replies: 7
    • Forum: Mimaki
  3.

    Need Help Mimaki CJV30-130 missing nozzles

    Sadly had a head strike and lost all cyan and magenta on the right side of test print. After soaking the head for a few days now it has come back but only partially. Hard cleans, normal cleans and nozzle washes as well. Attached pictures of some test prints, capping station and head. I...

  4. Suggestions When Is It Time To Replace The Head?

    Over the course of a couple months I started having banding issues and started having trouble printing red and started getting mixed ink dropping in puddles and splatters on the edges of the media. When preforming a nozzle check I'm missing a lot of nozzles on each channel except one. After the...

  5. Problem with lost yellow nozzle during print job!

    Hi, my problem is with lost yellow nozzles during print job gradually.... When i print file with red color, after few meters of print red color becomes lighter and lighter and it literally becomes magenta. At this point yellow dumpers is fully loaded, but when i try nozzle check, there is no...
Top